Section 2 Installation Medium/Large Configuration3BSE037076-510 D 25Medium/Large ConfigurationFigure 8. Medium/Large Scale ConfigurationRemote Access ServerRemote Access ClientAspect DirectoryConnectivityAspect DirectoryConnectivityServerserverNetworkFor a medium/large configuration, it is recommended to run the Remote AccessServer in the connectivity server node.Some combinations of these three basic configurations can also be used. For example if the provider system is small, but the subscriber system is connectedto a lot of provider systems, the configuration for a small system may be used on theprovider side, and a medium/large configuration may be used on the subscriber side.For larger systems and to minimize impact on the provider and subscriber systemmay a separate node be used for the Remote Access Server and Remote AccessClient.For more information about Multisystem Integration network configuration refer toSystem 800xA, Network, Configuration (3BSE034463*).
