Menu
AB Slotsport AB OG12 Quick Start Manual
   |
Dedicated to supplying the best Slot Racing Products to Racers Worldwide3 St James Terrace, Riding Mill, Northumberland, NE44 6ED EnglandTelephone 0044 (0) 1434-682475 - e-mail abslotsport@aol.comweb sites - www.abslotsport.biz - www.abslotsport.comSKYPE - abslotsport U.K. V.A.T. No. 910 9584 18BUILDING THE AB OG12 / Pro-Am CHASSISThank you for purchasing the AB OG12 chassis. This chassis has undergone much development and we aresure you will find this great chassis competitive and strong if you build it correctly.Firstly lets take a look at the components. Using a dremel, take care cutting the components and trimming offburrs from cut edges. Please read the instructions all the way through before picking up your tools!We recommend AB Chassis Solder and flux to assemble this kit.Guide plate &Guide spacerplate.Front upstop &front pan upstopplate.x 2Front wheelmount and panupstop platelock. x2Pin tube mounts x 4Centre spinerear mount &motor box over-lay front keyMotor box overlayPan cross barPan Straps x 4 Pan cross barretainerFront & centreCentre spinemountsWhen trimmingcomponents ensureto only trim joiningsprags and not thecomponentsthemselvesFront pan UpstopsX 2Note;- You will find 3 different “rail options” for thischassis, all of which are easily changed when findingwhich set up is good for your track. You can go -1) Single 0.032” rails2) Single 0.042” rails, or3) Twin 0.032” rails without having to modify the cuts inthe chassis frame, just the wire and tube you use, soread the instruction sheet in full before you startbuilding to ensure you understand your options!Generally for “scale” type track you may find the twin0.032” rail option best. |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved