Digital Video Recorder User Manual1) Click the Create button to create the certificate request.2) Download the certificate request and submit it to the trusted certificate authority forsignature.3) After receiving the signed valid certificate, import the certificate to the device.Step 5 There will be the certificate information after you successfully create and install thecertificate.Figure 11-17 Installed Certificate PropertyStep 6 Check the checkbox to enable the HTTPS function.Step 7 Click the Save button to save the settings.11.2.7 Configuring EmailPurposeThe system can be configured to send an Email notification to all designated users if an event isdetected, e.g. an alarm or motion event is detected, etc.Before configuring the Email settings, the DVR must be connected to a local area network (LAN)that maintains an SMTP mail server. The network must also be connected to either an intranet orthe Internet depending on the location of the e-mail accounts to which you want to sendnotification. Additional, the Preferred DNS server must be configured.Before you startMake sure you have configured the IPv4 Address, IPv4 Subnet Mask, IPv4 Gateway and thePreferred DNS Server in the Network Settings menu. Please refer to Chapter 11.1 ConfiguringGeneral Settings for detailed information.Step 1 Enter the Network Settings interface.Menu > Configuration > NetworkStep 2 Select the Email tab to enter the Email Settings interface.153Available from A1 Security Cameraswww.a1securitycameras.com email: sales@a1securitycameras.com
