175. Setup MenuBefore you use the Playon!DVRHD, please go to [SETUP] menu to configure to your requirement.① At the Home Menu page, select [SETUP] menu. ② [TV] => TV Region: Select a country.② [TV] => Channel Scan => AUTO SCAN: Scans the TVchannels automatically. It will start scanning analogue TVsignals first, followed by digital TV signals.(If you are using DVB-T only model, then it scans for digitalTV signals only).② [TV] => Channel Scan => AUTO SCAN: During autoscanning, press the [OK] button on the remote to cancelthe channel scanning.② [TV] => Channel Scan => MANUAL SCAN: You caninput your channel manually and press the [OK] buttonon the remote.② [TV] => Channel Set: You can select to fine tune analogueor digital TV signal.