Menu
7inova 7W230 Quick Installation Manual
  | |
Contents | 
Before you start to use this device, please check if there’s anythingmissing in the package, and contact your dealer of purchase toclaim for missing items:Package Contents:1x 7W230 WiFi Repeater1x 1m Ethernet cable with RJ45 connector1x Quick Installation GuideWireless Ceiling Mount Access Point 300MQuick Installation GuideModel7W230LED indicators’ Status Description:WPS/ResetWLAN LEDEthernet LEDPower LEDCautions:1. Disconnect the device in thunderstorms in case of lightning damage.2. Keep far from heat source and ensure ventilation.3. Keep waterproof in the storage, transportation and operating environment.Indicator NamePower Status Indicator Green On Get PoweredStatus DescriptionEthernet Status IndicatorGreen fast blinkGreen OnData Transmission via EthernetEthernet ConnectedWireless Status IndicatorGreen slow blink Wireless Function LaunchedGreen fast blink Data Transmission via wirelessLANReset: If need to reset the Repeater, press and hold RESET button for 3-5seconds, release until all other LED are off except Power LED.Note: Please check whether the WiFi-Repeater accord with factory defaultsettings once you can’t download http://192.168.2.1. If you are still not surewhat reasons, you can reset the WiFi-Repeater, just need to press the resetbutton for 3-5 seconds, then try again.Appearance Introduction1 Computer Configuration3 Configuration Mode2 Connect To Wireless Network1.1 Click “Start→Control Panel→Network and Internet→Network and SharingCenter→Change adapter settings→Wi-Fi(right click)→Properties”3.1.1 Follow process 2.3 to 2.5.3.1.2 Select “AP” and enter the information what you want to set up wirelessinformation and password, then click “Apply”, wait for 3~5 seconds it complete.3.1 Configure AP Mode3.2.1 Follow process 2.3 to 2.5.3.2.2 Select “Repeater” then click on “Search”.3.2.3 Select wireless which you want to connect and enter the password (if wireless don’thave password is “None”), then enter the wireless information what you want to set.3.2.4 Then click “Apply” and wait for 3~5 seconds it is complete.3.2 Configure Repeater Mode3.3.1 Follow process 2.3 to 2.53.3.2 Select “Client” then click on “Search”3.3 Configure Client Mode2.6 After logging in click “Easy Mode” and then click “Network Setting”, youwill see 3 modes: AP Mode, Repeater Mode and Client Mode2.1 Pulg the Wi-Fi Repeater to a wall socket.2.2 Click on the network icon( ) on the rightbottom of your desktop. You will find the signalfrom the Wi-Fi Repeater. Click on “Connect”and wait for a few seconds.2.3 When shows: “Connect to a Network”, please click “Connect to thenetwork without setting it up”2.5 The login screen below will appear. Enter the “Username” and “Password”then click “Login” to login. The default Username is “admin” and Passwordis “admin”.2.4 Open web browser and type http://192.168.2.1 in the browser’s addressbox. This number is the default IP address for this devices.1.2 Double click “Internet Protocol Version 4(TCP/IPv4)”1.3 To set up the computer IP 192.168.2.x (x arbitrary integer between 2~252),subnet mask of 255.255.255.0, Click “OK”. Back to the last interface andclick “OK”01 Wireless-N Repeater 02 Wireless-N Repeater 03 Wireless-N Repeater05 Wireless-N Repeater04 Wireless-N Repeater 06 Wireless-N Repeater 07 Wireless-N Repeater |
Related manuals for 7inova 7W230
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved