3onedata IMF204-2F Series Quick Installation Manual
IMF204-2F SeriesRing Network Serial to Fiber MODEMQuick Installation Guide3onedata Co., Ltd.Address: 3/B, Zone 1, Baiwangxin High TechnologyIndustrial Park, Song Bai Road, NanshanDistrict, Shenzhen, 518108, ChinaWebsite: www.3onedata.comTel: +86 0755-26702688Fax: +86 0755-26703485【Package Checklist】Please check whether the package and accessories are intactwhile using the device for the first time.1 Serial to fiber MODEM 2 Quick installation guide3 Lug x2 4 Power line ( ACstandard feature )5 Warranty card 6 CertificationIf any of these items are damaged or lost, please contact ourcompany or dealers, we will solve it ASAP.【Product Overview】The products of this series are industrial unmanaged ringnetwork serial to fiber MODEM, Models are as follow:Model I. IMF204-2F-4DI(RS-485)-P(12~48VDC) (2 fiberinterfaces + 4 RS-485 serial ports, 12~48VDC)Model II. IMF204-2F-4DI(RS-485)-P(100~240VAC) (2 fiberinterfaces + 4 RS-485 serial ports, 100~240VAC)【Panel Design】 Front View Rear ViewModel IModel II1. Serial port transmitting and receiving dataindicators2. Fiber port connection status indicator3. Master/Slave device status indicator4. Running status indicator5. DIP switch6. Console port7. Fiber interface8. RS-485 serial port9. Terminal block of 12~48VDC power supply input10. Terminal block of 100~240VAC power supply input【Mounting Dimension】Unit: mmNote before mounting: Don't place or install the device in area near water ormoist, keep the relative humidity of the devicesurrounding between 5%~95% without condensation. Before power on, first confirm the supported powersupply specification to avoid over-voltage damaging thedevice. The device surface temperature is high after running;please don't directly contact to avoid scalding.【Wall-mounted Device Mounting】Step 1 Adopt a M3 screw to install the left/right mountingboard on the device backboard.Step 2 On the wall of device mounting, place the device onthe wall for reference or refer to the mountingdimension to mark two screw positions.Step 3 Attach the equipment to the marked wall and |
Related manuals for 3onedata IMF204-2F Series
This manual is suitable for:
Product
Menu
Learn More
Menu
Legal
Menu
Copyright © 2024 OneStart. All Rights Reserved