3onedata ICP222-2F-2CI Quick Installation Manual

3onedata ICP222-2F-2CI Quick Installation Manual Manual pdf 1 page image

ICP222-2F-2CICAN ServerQuick Installation Manual3onedata Co., Ltd.Address: 3/B, Zone 1, Baiwangxin High TechnologyIndustrial Park, Song Bai Road, NanshanDistrict, Shenzhen, 518108, ChinaWebsite: www.3onedata.comTel: +86 0755-26702688Fax: +86 0755-26703485【Package Checklist】Please check the integrity of package and accessories whilefirst using the product.1. CAN server x 1 (includingterminal blocks)2. Certification3. DIN-Rail mounting attachment 4. CD5. Quick installation manual 6. Warranty cardIf any of these items are damaged or lost, please contact ourcompany or dealers, we will solve it ASAP.【Product Overview】This product is an industrial CAN device networking server.The model is ICP222-2F-2CI (2 CAN-Bus + 2 100M fiberports).【Panel Design】 Top view, bottom view and rear view Front view and side view1. Grounding screw2. Power supply input terminal block3. Console port4. DIN-Rail mounting kit5. Fiber port connection status indicator6. Power supply connection status indicator7. CAN interface status indicator8. Device running status indicator9. 100M fiber port10. CAN-Bus interface11. DIP switch【Mounting Dimension】Unit: mmNote before mounting: Don't place or install the device in area near water ormoist, keep the relative humidity of the devicesurrounding between 5%~95% without condensation. Before power on, first confirm the supported powersupply specification to avoid over-voltage damaging thedevice. The device surface temperature is high after running,please don't directly contact to avoid scalding.【DIN-Rail Mounting】 Install the deviceThe product adopts 35mm standard DIN-Rail mounting whichis suitable for most industrial scenes, mounting steps asfollows:Check if the DIN-Rail mounting kit is installed firmly.Step 1Insert the bottom of DIN-Rail mounting kit (one sideStep 2with spring support) into DIN-Rail, and then insert

/ 3

Related manuals for 3onedata ICP222-2F-2CI