3e Technologies International AirGuard 3e-525C–3 User Manual

Contents

3e Technologies International AirGuard 3e-525C–3 User Manual Manual pdf 38 page image

3e–525C–3 Wireless Access Point Chapter 3: Access Point Configuration30 29000171-001 AWireless Access Point ConfigurationGeneralWireless Setup allows your computer’s PC Card to communicate withthe access point. Once you have completed wireless access point configu-ration, you can complete the rest of the configuration wirelessly, assum-ing that you have installed and configured a wireless PC card on yourcomputer. (If you have not done so, you will have to do that to establishcommunications. Follow the manufacturer's instructions to set up the PCCard on each wireless device that will be part of the WLAN.)The Wireless Access Point — General screen lists the MAC Addressof the AP card. This is not the MAC Address that will be used for the BS-SID for bridging setup, however. That is found on the Wireless Bridge— General screen.If you will be using an SSID for a wireless LAN, enter it here and inthe setup of each wireless client. This nomenclature has to be set on theaccess point and each wireless device in order for them to communicate.