Menu
3dsimo MultiPro Instructions For Use Manual
Also see for MultiPro: User manual
  |
Instruction for use - 3Dsimo MultiPro : Multifuctional tool for workshops and households1. Introduction2. Package content3. 3Dsimo MultiPro controls4. Smartphone App5. Attachment changeCongratulations on your purchase of 3DsimoMultiPro, multifunctional tool, which will help youtransform your creativity into reality. All you needto do, is power up the 3Dsimo MultiPro usingincluded adapter, chose attachment, mount theattachment and finish tutorial displayed on thedevice.Before you start using the device, make sure youare familiar with this user’s manual and all thefunctions, maintanance and risks of using 3DsimoMultiPro.In case of any questions, please visit our website orcontact our customer support:support@3dsimo.com3Dsimo Multipro package includes:1x 3Dsimo MultiPro with 3D drawingattachment mounted1x Soldering attachment1x Burning attachment1x Foam cutting attachment1x Platform for accurate foam cutting1x Platform bolt1x Power adapter1x Spool of resistance wire1x Package of soldering tin15 meters of filamentSmartphone app is available for Android and iOS devices.(3Dsimo App will be available 1.2.2019)3Dsimo App allows you to update your device for futureattachments, also offers a number of tutorials and ideas onusage of your 3Dsimo MultiPro.3Dsimo MultiPro connectivity is available via Bluetooth.Your 3Dsimo MultiPro comes with the 3D drawing toolattached.To dismount the attachment, press Attachment dismountbutton, then dismount the attachment away from thedevice.To mount any attachment, insert chosen attachment intoattachment slot. The attachment will be automaticalyrecognised by the device.If the attachment was inserted for the first time, tutorial forthe specific attachment will appear on the device display.front button back button4way navigation buttonmainbuttondisplaypowerinputfilamentslotattachmentslotattachment dismount button3D drawing attachmentAfter mounting the 3D drawing attachment andsuccessful completion of tutorial, choose correctfilament type. Material profile can be changed withnavigation cross, using left and right buttons. Also youcan choose different feeding speeds using up and downbuttons. When READY is shown on the display, insertfilament. When filament is inserted, it is necessary topush the filament in, while holding front button. Afterabout 5 seconds, filament will start to come out from tipof the nozzle.Foam cutting attachmentFirst, you have to tighten the cutting wire betweenboth ends of the attachment (see picture), mount theattachment to the 3Dsimo MultiPro, choose desiredtemperature of the tip (0-100%) and activate heating ofthe attachment by pressing front button. |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved