Menu
3D Systems ProJet 5500X User Manual
Also see for ProJet 5500X: Quick start guide
                                                                  | |
Contents
| 
103D Systems, Inc.PART MATERIALVisiJet CR-CL, CR-WH, CF-BKShelf life 1 yr.Climate Cool, dry area withadequate ventilationStorage Class 10 Environmentallyhazardous liquidsStorage Temp Below 95°F (35°C)Environmental Conditions No direct sunlight, heat,flames, or UV energy.MATERIAL HANDLING AND STORAGESUPPORT MATERIALVisiJet S500Shelf life 5 yr.Climate Cool, dry area withadequate ventilationStorage Class N/AStorage Temperature Below 95°F (35°C)Environmental Conditions No direct sunlight, heat,flames, or UV energy.NOTE: For optimal results, keep stored cartons closed, and do not open until bottle is ready for use.Always check bottle’s expiration date before loading. Do not load bottles into 3D printer system if they are about to expire. When 3D printersystem detects an expired bottle, it aborts the build and rejects the bottle if the expiration date has expired for support material or more thanone year past the expiration date for part material.NOTE: When storing material bottles that have been used but still have materials in them, do not place the bottles on their side; standbottles in the upright position. Also, in the case where used bottles with materials are removed from the MDM and are still warm, itmust be stored with the cap vented. If the warm bottle is not vented, the wax will contract during cooling and the bottle’s bottom maybecome fl at which will prevent re-engagement in the MDM. See “Material Delivery Modules (MDM) and Material Bottles” on page 25for a description of the MDM.Support material bottles must be loaded in the left side material delivery module. The part material bottles must be loaded in the right materialdelivery module. Before loading material bottles into the 3D printer system, inspect bottles for signs of damage or leakage. Do not load adamaged or leaking bottle. Dispose of them according to local regulations. |
Related manuals for 3D Systems ProJet 5500X
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved