Configure Guest Access Services 69Configure GuestAccess ServicesGuest access is access for visitors at your location and is typically clear (noencryption).This section contains the following information about how to configureGuest access services: “Task Table” on page 69 “Step Summary” on page 71 “Optional: Configure Mobility Profiles” on page 81Table 11 contains the tasks you must perform to configure Guest accessservices. The “Step Summary” provides the configurable options youshould set. The table contains references to the section “Example:Configure Employee Access” on page 55. The references are provided incase you want to refer back to detailed steps. However, be sure to usethe configurable options for Guest access services set forth in the “StepSummary” on page 71. Also, you can optionally configure mobilityprofiles for your Guest access services to limit access based on criteria,such as RF coverage area or time of day.Task Table Table 11 contains the tasks you need to perform to create Guest access services.For a summary of configurable items, see “Step Summary” on page 71.Table 11 Creating a Service for Guest AccessTask PathPrimary Parameters toConfigure“Create aRadio Profile”on page 561 Tool bar option: selectConfiguration.2 Organizer panel: expandthe WX switch.3 Expand Wireless.4 Click Radio Profiles.5 Select Radio Profile in theTask List.From the Create Radio Profilewizard: Radio profile name: enter a nameAfter you create the serviceprofile, you can map it to theradio profile.After you install the MAPs, youcan map their radios to the radioprofile.Note: The examples in this chapterconfigure the radio profile first.However, you also can configurethe radio profile later as part ofservice profile configuration.
