Lay ration ExampleN1/0/1. PC 1’s MAC address is 0011-0011-0011.ss of 0011-0011-0011 and the destination.er 2 ACL Configuetwork requirementsPC 1 and PC 2 connect to the switch through EthernetApply an ACL to filter packets with the source MAC addreMAC address of 0011-0011-0012 from 8:00 to 18:00 everydayNetwork diagramFigure 44-5 Network diagram for Layer 2 ACLConfiguration proceduredailythe source MAC address of 0011-0011-0011 and the destinationeny source 0011-0011-0011 ffff-ffff-ffff destestrame-4000] quitUser-nts# Define a periodic time range that is active from 8:00 to 18:00 everyday. system-view[Sysname] time-range test 8:00 to 18:00# Define ACL 4000 to filter packets withMAC address of 0011-0011-0012.[Sysname] acl number 4000[Sysname-acl-ethernetframe-4000] rule 1 d0011-0011-0012 ffff-ffff-ffff time-range t[Sysname-acl-ethernetf# Apply ACL 4000 on Ethernet 1/0/1.[Sysname] interface Ethernet1/0/1[Sysname-Ethernet1/0/1] packet-filter inbound link-group 4000defined ACL Configuration ExampleNetwork requiremeAs shown in Figure 44-6, PC 1 and PC 2 are connEthernet 1/0/2 respectively. They belong to VLANected to the switch through Ethernet 1/0/1 and1 and access the Internet through the same gateway,ss of VLAN-interface 1).ckets from PC 1 that use the gateway IP address aswhich has an IP address of 192.168.0.1 (the IP addreConfigure a user-defined ACL to deny all ARP pathe source address from 8:00 to 18:00 everyday.44-17
