3Com 3C16075 Installation Manual

Contents

3Com 3C16075 Installation Manual Manual pdf 5 page image

SuperStack 3 Advanced RPS Chassis Loading Limitations 5Table 1 Maximum Number of Advanced RPS Power Modules per ChassisConfigurationType 1 60 WModule (3C16072)Type 1 100 W Module(3C16073), Type 2 (100W) Module (3C16074),or Type 2A (100 W)Module (3C16074A)Type 3 Module(325 W) (3C16075)A 8 none noneB 7 none noneC 6 1 noneD 5 1 noneE 4 2 noneF 3 3 noneG 2 3 noneH 1 4 noneI none 4 noneJ ** Install the power modules in slots 7 and 8.none 1 1K†† Install the 100 W and Type 3 Module in slots 7 and 8, and the 60 W Module in slot 5 or 6, whicheveris next to the 100 W Module.1 1 1L‡‡ Install the Type 3 Module in slot 7, and the 60 W Modules in slots 8 and 5.2 none 1M ****Install two Type 3 Modules in the chassis using single DC cables, that is, both modules drawingpower separately. If using this configuration, install the modules in slots 7 and 8.none none 2N††††Install four Type 3 Modules in the chassis using the optional ‘Y’ cable. Two modules that are paired,power-share at any one time. If using this configuration, install the four modules in slots 5, 6, 7, and8. Connect the ‘Y’ cables across slots 7 and 5, and 8 and 6 respectively, that is, the power modules inslots 7 and 5 are paired, and the power modules in 8 and 6 are paired.none none 4