2N Helios Uni Installation Manual

2N Helios Uni Installation Manual Manual pdf 42 page image

ProgrammingThe access to this mode is password-protected. For details refer to the Programmingsection. The voice menu helps you considerably with programming the intercom.Having entered the programming mode, you can also alter any parameter andmemory settings.CautionThe above mentioned functions (except for calls to the intercom)require a telephone settone-dialling .Signals OverviewSignal Name MeaningConfirmation Sent immediately after line seizure for incomingcalls (can be heard by the calling party).Signals switch activation (by DTMF) – can beheard by the person "at the other end" whoactivated the switch.Refusal Signals that a non-programmed button has beenpressed.Can be heard from the loudspeaker after lineconnection (first connection signalling).Signals an incoming call if intercom has not beenprogrammedStoring Signals switch deactivation (if activated by DTMF).Hang-up Sent to notify that the call is terminated (in allcases).Long continuoustoneSignals that the unit is going through fullinitialisation or dialling memory or passwordclearing.CIE-Group Ltd, www.cie-group.com 42 / 63