2N EntryCom User And Service Manual

2N EntryCom User And Service Manual Manual pdf 27 page image

277.2. Camera InstallationThe camera unit, Part No. 9135210E, can be built into any EntryCom basic unitduring installation or as an option to be added later. You can also use the camera unit incombination with any Vandal resistant panel. It is a colour CCD camera with highresolution of 420 TV rows, with a monochrome night mode (infrared backlight hiddenunder the nameplates), and has a wide-angle pin-hole lens (90º diagonally) and a tiltinghinge for manual direction adjustment.The camera has a PAL composite output and can be connected to any TVdisplay (e.g. Part No. 9134147E - 7" TFT LCD), or a video server (Part No. 9134145E,MPEG4 LAN video server). A coaxial or twisted cable can be used for connection.A sight glass is included in the delivery, which replaces the non-transparentEntryCom basic unit sight glass imitation. To install the camera, follow the instructionsthat come with it.IMPORTANT!To install the camera, use the stabilised 12 V dc power supply. To get a suitable (12V /2A) one, order Part No. 91341481E.7.3. Display InstallationThe display module, Part No. 9135240E, can be built into any EntryCom basicunit (excepting units with vandal resistant panel) during installation or as an option to beadded later. It is black & white, graphic LCD with resolution 128 x 64 pixels, whitebacklight and USB interface for configuration.It has memory for up to 1000 characters, and it is controlled by basic modulebuttons and keypad, if present. Each character can be alphanumeric or graphic up towhole display size.A sight glass is included in the delivery, which replaces three button labels onEntryCom basic unit. To install the display, follow the instructions that come with it.IMPORTANT!To install the disply, use the stabilised 12 V dc power supply. To get a suitable (12V /2A) one, order Part No. 91341481E.