Canon imagePROGRAF iPF820 manuals
imagePROGRAF iPF820
Table of contents
- troubleshooting guide
- Table Of Contents
- Table Of Contents
- Chapter 1 Using This Guide
- Model Groups
- Error Code Index
- 1032-1042 codes
- 2f12-2f21 codes
- 2f25-2f28 codes
- From 2f2d to 2f30 codes
- 2f38-2f41 codes
- 2f42-2f47 codes
- 2f48-2f52/4001-401d codes
- Index of Symptoms and Imaging Failures
- B. Operational Failures
- F. Application-Dependent
- Chapter 3 More Sophisticated Fault Isolation Tasks
- F1F】Purge sensor error
- F26】Carriage operation disabled
- F2F】Non-ejection detection error, 【2F30】Non-ejection detecting position adjustment error
- C】Roll paper leading edge detection error, 【200D】Cut sheet leading edge detection error
- Skew detection error, 【2017】Paper right side detection error, 【2018】Paper left side detection error, 【2405】Borderless printing disabled
- E27】Paper jam while feeding, ejecting or printing on paper (Jam 1)
- E25】Paper jam while feeding, ejecting or printing on paper (Jam 2)
- E24】Faulty roll paper unit, 【2E0E】Roll paper unit not available
- Cutting failure (Cannot cut sheet)
- F24】Cutter shift timeout error
- Cutting failures without error indications
- E】,【403F】Printhead abnormal temperature rises
- Carriage lifting error
- Chapter 4 Fault Isolation Tool Collection
- T03 Nozzle Check Print Fault Isolation Tool
- T04 Information required to request investigation
- T05 Collecting a PRN File (Windows only)
- T06 Collecting PC Detailed Information
- T07 Collecting Printer Driver Settings
- T08 Driver Function Description
- T09 Collecting Status Information
- T10 Collecting Screen Shots
- T11 Ink Supply System Fault Isolation Tool
- T12 Purge Unit Fault Isolation Tool
- T13 Carriage encoder installation fault isolation tool
- T15 Recommended head adjustment procedure
- T17 Electrical ejection fault isolation tool
- T18 Flat Cable Fault Isolation Tool
- T19 Special Mode for Servicing
- download mode
- T20 Cleaning operation
- Chapter 5 Miscellaneous Information
- Upgrading Firmware
- Description of L Printer Service Tool, and How to Use It
- Upgrading (downgrading) firmware
- Notes on Replacing Parts
- Greasing
- Replacing the Head
- Chapter 6 Main Unit Configuration Diagrams
- LFP-IJ Printer Basic Configuration Diagram
- function description
- Paper Paths by Series
- iPF700 Series
- iPF8000 Series
- iPF800 Series
- iPF650/750 Series
imagePROGRAF iPF820
Table of contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Product Overview
- Features
- Cutter
- Stand
- Media take-up unit
- Hard disk drive
- Consumables
- Product Specifications
- Detailed Specifications
- Interface Specifications
- Names and Functions of Components
- Front
- Rear
- Top Cover (Inside)
- Carriage
- Basic Operation
- Main Menu
- Basket Unit
- Safety and Precautions
- Adhesion of Ink
- Electric Parts
- Other Precautions
- Ink Tank
- Handling the Printer
- Precautions When Servicing Printer
- Basic Operation Outline
- Printer Diagram
- Print Signal Sequence
- Print Driving
- Firmware
- Operation Sequence at Power-off
- Print Control
- Print Position Adjustment Function
- Printer Mechanical System
- Ink Passage
- Ink Tank Unit
- Carriage Unit
- Printhead
- Purge Unit
- Maintenance Cartridge
- Air Flow
- Paper Path
- Cutter Unit
- Printer Electrical System
- Overview
- Main Controller
- Carriage Relay PCB
- Motor Driver
- Power Supply
- Detection Functions with Sensors
- Ink passage system
- Carriage system
- Paper path system
- Reinstalling the Printer
- Service Parts
- Disassembly/Reassembly
- External Covers
- Drive Unit
- Ink Tube Unit
- Pick-up/Feed Unit
- Waste Ink Collection Unit
- Multi Sensor
- Linear Encoder Sensor
- Head Management Sensor
- PCBs
- Opening the Cap/Moving the Wiper Unit
- Opening and closing ink supply valves
- Draining the ink
- Applying the Grease
- Adjustment and Setup Items
- Periodic Replacement Parts
- Periodic Maintenance
- Troubleshooting
- Head relay PCB
- Version Up
- Service Tools
- Service Mode
- Map of the Service Mode
- Details of Service Mode
- Sample Printout
- Special Mode
- Outline
- Warning Table
- Error Table
- Sevice Call Table
imagePROGRAF iPF820
Table of contents
- user manual
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- how to use this manual
- searching topics
- html version of the manual for printing
- printing selected topics
- printer parts
- Back
- top cover (inside)
- ink tank cover (inside)
- Wheeled Output Stacker
- Control Panel
- turning the printer on and off
- turning the printer off
- printer modes
- mode transition
- online, and state of the control panel
- menu mode, and state of the control panel
- switching modes
- switching to menu mode
- printer menu operations
- submenu operations
- main menu operations
- accessing menus
- specifying menu items
- specifying numerical values
- Menu Structure
- main menu during printing
- main menu settings
- paper menu
- paper details
- job management
- gl2 settings
- adjust printer
- interface setup
- system setup
- main menu settings (during printing)
- submenu display
- printer information
- status print
- checking instructions during printer operations
- optional accessories
- printing performance
- hard disk
- packaging materials
- print area
- printing procedure
- sheet printing
- loading and printing on rolls
- loading and printing on sheets
- printing in windows
- registering the printer
- canceling print jobs
- canceling print jobs from windows
- canceling print jobs from the control panel
- canceling print jobs from mac os x
- Paper
- updating paper information
- paper sizes
- handling rolls
- specifying the paper length (roll)
- attaching the roll holder to rolls
- loading rolls in the printer
- loading rolls in the roll 2 (lower) holder
- removing the roll from the printer
- removing the roll holder from rolls
- clearing jammed roll paper
- feeding roll paper manually
- keeping track of the amount of roll paper left
- specifying the ink drying time for rolls
- mac os x
- specifying the cutting method for rolls
- eject (waiting for ink to dry after printing)
- cutting the leading edge of roll paper automatically
- reducing dust from cutting rolls
- Roll Holder Set
- automatic roll switching
- handling sheets for paper feed slots
- loading sheets in the printer
- manually loading paper to the position for printing
- removing sheets
- clearing a jammed sheet
- Output Stacker
- using the wheeled output stacker
- working with various print jobs
- printing photos and images (windows)
- printing photos and images (mac os x)
- printing photos in monochrome
- printing cad drawings
- printing line drawings and text (windows)
- printing line drawings and text (mac os x)
- printing cad drawings in monochrome
- specifying colors and printing cad drawings
- using the printer with a color imagerunner
- adjusting images
- color adjustment
- fine-tuning colors of photos and images (windows)
- fine-tuning colors of photos and images (mac os x)
- for printing
- print quality
- color settings
- enhancing printing quality
- choosing paper for printing
- specifying paper in the printer driver
- printing enlargements or reductions
- resizing originals to match the paper size (windows)
- resizing originals to match the paper size (mac os x)
- resizing originals to fit the roll width
- resizing originals to fit the roll width (windows)
- resizing originals to fit the roll width (mac os x)
- resizing originals by entering a scaling value
- resizing originals by entering a scaling value (windows)
- resizing originals by entering a scaling value (mac os)
- printing at full size
- printing at full size (windows)
- printing at full size (mac os x)
- borderless printing at actual size
- borderless printing on paper of equivalent size
- borderless printing by resizing originals to match the
- printing banners or at other non-standard sizes
- registering a custom paper size
- creating the banner in the application
- printing the banner
- register a custom page size
- printing on non-standard paper sizes
- printing by using custom size
- printing by using custom paper size
- printing on non-standard paper sizes (mac os x)
- tiling and multiple pages per sheet
- imageprograf free layout (macintosh)
- printing multiple originals next to each other (windows)
- printing multiple pages continuously
- printing multiple pages continuously (windows)
- printing multiple pages continuously (mac os x)
- printing multiple pages per sheet
- printing multiple pages per sheet (windows)
- printing multiple pages per sheet (mac os x)
- printing posters in sections
- printing large posters (windows)
- centering originals
- printing originals centered on rolls (windows)
- printing originals centered on rolls (mac os x)
- printing originals centered on sheets
- printing originals centered on sheets (windows)
- printing originals centered on sheets (mac os x)
- conserving roll paper
- conserving roll paper by rotating originals 90 degrees
- conserving roll paper by printing originals without top and bottom margins
- checking images before printing
- preview (macintosh)
- checking the layout in a preview before printing
- other useful settings
- printing with watermarks-copy, file copy, and so on
- making the original orientation match the paper orientation
- making the original orientation match the paper orientation (windows)
- making the original orientation match the paper
- using favorites
- cutting roll paper after printing
- cutting roll paper after printing (windows)
- cutting roll paper after printing (mac os x)
- windows software
- accessing the printer driver dialog box from applications (windows)
- main sheet (windows)
- media detailed settings dialog box (windows)
- view settings dialog box for the printing application
- color adjustment sheet: color (windows)
- driver matching mode
- icc matching mode, driver icm mode and host icm mode
- page setup sheet (windows)
- paper size options dialog box (windows)
- layout sheet (windows)
- page options dialog box (windows)
- special settings dialog box (windows)
- favorites sheet (windows)
- utility sheet (windows)
- support sheet (windows)
- device settings sheet (windows)
- settings summaries dialog box (windows)
- status monitor
- digital photo front-access
- using posterartist to compose originals
- device setup utility
- installing imageprograf device setup utility
- mac os x software
- main pane (mac os x)
- media detailed settings dialog box (mac os x)
- color settings pane: color (mac os x)
- matching pane
- color settings pane: monochrome (mac os x)
- Page Setup Pane (Mac OS X)
- utility pane (mac os x)
- additional settings pane (mac os x)
- Support Pane (Mac OS X)
- imageprograf printmonitor (macintosh)
- network environment
- using remoteui
- specifying printer-related information
- initializing the network settings
- network setting (windows)
- sharing the printer in windows
- Specifying the Printer's Frame Type
- specifying the frame type using the printer control panel
- specifying netware print services
- specifying netware protocols
- activating appletalk on the printer
- printer hard disk operations
- saved print jobs
- storage destination
- saving print jobs sent from sources other than the
- saving print jobs
- using the printer driver (windows)
- using the printer driver (mac os)
- do not save print jobs in the common box
- using the control panel
- setting passwords for personal boxes
- naming personal boxes
- displaying a list of saved jobs
- printing a list of saved jobs
- printing saved jobs
- moving saved jobs
- displaying details of saved jobs
- renaming saved jobs
- deleting saved jobs
- checking the free hard disk space
- Erasing Data on the Printer's Hard Disk
- adjustments for better print quality
- adjusting line misalignment (head inc. adj)
- troubleshooting paper abrasion and blurry images
- adjusting the feed amount
- Auto Band Adjustment (Auto Band Adj.)
- Manual Band Adjustment (Manual Band Adj)
- adjusting line length (adjust length)
- adjusting the vacuum strength (vacuumstrngth)
- Ink Tanks
- replacing ink tanks
- access the menu for ink tank replacement
- remove the ink tank (330 ml)
- remove the ink tank (700 ml)
- load the ink tank (330 ml)
- load the ink tank (700 ml)
- checking ink tank levels
- When to Replace Ink Tanks
- checking for nozzle clogging
- cleaning the printhead
- replacing the printhead
- maintenance cartridge
- compatible maintenance cartridges
- replacing the shaft cleaner
- checking the remaining maintenance cartridge capacity
- when to replace the maintenance cartridge
- cleaning the printer
- cleaning inside the top cover
- other maintenance
- updating the firmware
- frequently asked questions
- problems regarding paper
- troubleshooting when paper jams are not found
- roll paper cannot be inserted into the paper feed slot
- printing does not start
- the printer stops during a print job
- problems with the printing quality
- paper rubs against the printhead
- the edges of the paper are dirty
- the surface of the paper is dirty
- printed colors are inaccurate
- banding in different colors occurs
- colors in printed images are uneven
- image edges are blurred or white banding occurs
- setting the blue switch on the platen
- the contrast becomes uneven during printing
- documents are printed in monochrome
- lines are misaligned
- cannot print over a network
- cannot print over a netware network
- cannot print over appletalk or bonjour networks
- installation problems
- removing installed printer drivers
- hp-gl/2 printing takes a long time
- the printer does not go on
- if the printer makes a strange sound
- the printer consumes a lot of ink
- ink level detection
- error message
- Error Messages
- messages regarding paper
- the paper is too small
- paper size not detected
- this paper cannot be used
- roll printing is selected
- roll x is empty. (x is 1 (upper) or 2 (lower)
- regular printing is selected, but a roll is loaded
- paper jam
- Paper loaded askew
- End of paper feed
- borderless printng not possible
- the roll feed unit is loose
- messages regarding ink
- ink tank is empty
- the display screen indicates agitating
- use another paper
- cannot adjust band
- blue platen switch is dirty
- messages regarding printheads
- phead needs cleaning
- messages regarding the maintenance cartridge
- messages regarding the hard disk
- maximum jobs stored
- gl2: w0502 the parameter is out of range
- Other Messages
- prepare for parts replacement
- Table Of Contents
- Confirming Print Settings (Windows)
- Email Notification When Printing is Finished or Errors Occur
- Insufficient paper for job
- Table Of Contents
- Printer Specifications
- Printing Office Documents
- Table Of Contents
- The display screen indicates the system is filling with ink
- Unknown file