GE hydran m2 manuals

hydran m2

Brand: GE | Category: Measuring Instruments

Table of contents

1. Table Of Contents
2. Table Of Contents
3. Table Of Contents
4. INTRODUCTION
5. Safety Warnings In Six Languages
6. DE] (in German) WARNUNG
7. SV] (in Swedish) VARNING
8. Preface
9. Standard GE Energy Warranty
10. GENERAL WARNINGS
11. Figure 3: Do Not Block the Sensor's Breathing Hole or Puncture the Breathing Hole's Membrane
12. Figure 6: Do Not Install the Hydran M2 on the Inlet Side of the Radiator Pump
13. Figure 8: Do Not Paint the Sensor or Clean It with Any Solvent
14. INSTALLATION
15. Figure 10: Mounting Locations of the Hydran M2 on a Transformer
16. Figure 11: Bottom Clearance
17. Tools for installation
18. Figure 12: Tools Required for the Installation
19. Mounting the Hydran M2 on a Valve
20. Figure 15: Wrap the Sensor's Threads with PTFE Tape
21. Figure 17: The Bleed Screw Must Be on Top, at the 12 O'clock Position
22. Figure 19: Installing the Hydran M2 on the Sensor
23. Installing the Cables
24. Figure 22: Installing Cable Conduits
25. Figure 24: Wiring of Self-Powered, Analog Inputs
26. Figure 27: General Wiring of the Analog Output Terminal Block
27. Figure 30: Wiring of the Alarm Relays Terminal Block
28. SOFTWARE CONFIGURATION
29. Setting the Date and Time
30. Testing the Sensor
31. Setting Gas Level Alarm Parameters
32. Setting Moisture Level Alarm Parameters
33. Setting the Network Communication Parameters
34. Setting the Optional Analog Input Parameters
35. Setting the Optional Analog Output Parameters
36. Configuring the Models
37. Installing the Cover
38. Commissioning
39. COMMUNICATIONS & NETWORKING
40. Figure 39: Grounding the RS-485 Conduits
41. Figure 41: Wiring Details of the RS-485 between 2 or more Hydran M2s
42. Connecting the Hydran M2 to Hydran 201Ci Controllers
43. Figure 43: Wiring of the Supervisory Link between a Hydran M2 and a Hydran 201Ci-1 Controller
44. Connecting the Hydran M2 to a D25
45. MODIFICATION RECORD