OneStart

Menu

Toshiba e-STUDIO353 manuals

e-STUDIO353 first page preview

e-STUDIO353

Brand: Toshiba | Category: All in One Printer
Table of contents
  1. CONTENTS
  2. Table Of Contents
  3. Table Of Contents
  4. Table Of Contents
  5. Notice to Users
  6. Toshiba Quality is Second to None
  7. Preface
  8. When installing or moving
  9. When using the Multifunctional Digital Systems
  10. during maintenance or inspection
  11. when handling supplies
  12. disclaimer notice
  13. environmental information
  14. 1. BEFORE USING EQUIPMENT
  15. Table Of Contents
  16. description of each component
  17. configuration of options
  18. Control panel
  19. Adjustment of the angle of the control panel
  20. Touch panel
  21. adjusting the contrast of the touch panel
  22. setting letters
  23. turning power on
  24. When department or user management is used
  25. user management
  26. Turning power off (Shutdown)
  27. Energy Saving Mode
  28. Setting Copy Paper
  29. Acceptable copy paper
  30. recommended paper
  31. Setting copy paper (size change)
  32. side guide
  33. changing the setting of paper size
  34. Placing paper in the Large Capacity Feeder (optional)
  35. Drawer for special uses
  36. clearing the drawer for special uses
  37. 2. HOW TO MAKE COPIES
  38. how to make copies
  39. Acceptable originals
  40. maximum number of sheets for scanning
  41. Placing originals on the glass
  42. book-type originals
  43. Using the Reversing Automatic Document Feeder (optional)
  44. continuous feed mode
  45. single feed mode
  46. making copies
  47. Copying procedure
  48. stopping the copying operation
  49. Scanning the next originals during copying (Auto job start)
  50. confirming and canceling auto job
  51. Interrupt copying in progress and make other copies (Interrupt copying)
  52. bypass copying
  53. Bypass copying on standard size paper
  54. Bypass copying on non-standard size paper
  55. registering non-standard size in the memory
  56. Proof Copy
  57. 3. SETTING OF BASIC COPY MODES
  58. SETTING OF BASIC COPY MODES
  59. paper selection
  60. manual paper selection
  61. copying mixed-size originals in one go (mixed original size)
  62. enlargement and reduction copying
  63. specifying both original size and copy size separately
  64. Type of finishing mode
  65. Name of each part in the Finisher (optional)
  66. Name of each Inner Finisher (optional)
  67. sort/group copying
  68. rotate sort mode
  69. staple sort mode
  70. maximum number of sheets for stapling
  71. magazine sort & saddle stitch mode (booklet mode)
  72. Hole punch mode (optional)
  73. duplex copying
  74. original glass
  75. original mode
  76. Copy Density Adjustment
  77. manual copy density mode
  78. IMAGE ADJUSTMENT
  79. Background Adjustment
  80. Sharpness
  81. 5. USING THE EDITING FUNCTIONS
  82. USING THE EDITING FUNCTIONS
  83. image shift
  84. creating a bookbinding margin
  85. edge erase
  86. book center erase
  87. dual page
  88. magazine sort
  89. EDITING
  90. mirror image
  91. negative/positive reversal
  92. xy zoom
  93. cover sheet
  94. sheet insertion
  95. TIME STAMP
  96. page number
  97. job build
  98. image direction
  99. book - tablet
  100. ADF / SADF
  101. 6. e-FILING
  102. e-FILING
  103. public box
  104. creating user boxes
  105. Changing Data of User Boxes
  106. deleting user boxes
  107. storing documents in e-filing
  108. printing stored documents
  109. test printing
  110. printing the stored document after changing the settings
  111. deleting folders or documents
  112. Appendix
  113. registering user groups and templates
  114. registering the new user group
  115. registering a template in the user group
  116. changing data of user groups and templates
  117. recalling templates
  118. when recalling a template in a user group
  119. deleting user groups or templates
  120. deleting a template
  121. 8. JOB STATUS
  122. job status
  123. Confirming Print Job Status
  124. print jobs
  125. pausing print jobs
  126. proof print jobs
  127. continuing printing after proof printing
  128. deleting proof print jobs
  129. Private print jobs
  130. printing private print jobs
  131. deleting private print jobs
  132. When using department codes
  133. keying in correct department code to print
  134. deleting invalid print jobs
  135. confirming scan job status
  136. log list
  137. Confirming job history in log list
  138. send log
  139. receive log
  140. scan log
  141. Registering into address book from log lists
  142. Printing journals (send/receive log list)
  143. print status display
  144. error code
  145. blinking graphic symbols
  146. drawer display on the touch panel
  147. replace toner cartridge symbol
  148. recommendation for original toner
  149. replace toner bag symbol
  150. jam symbols
  151. fuser unit
  152. Table Of Contents
  153. Call Service Symbol
  154. WHEN THIS MESSAGE APPEARS
  155. Check staple cartridge
  156. Check staple cartridge in the Saddle Stitch Unit
  157. Examine stapler
  158. READY (CHECK STAPLER)
  159. Examine stapler in the Saddle Stitch Unit
  160. READY (CHECK SADDLE STITCH STAPLER)
  161. Time for periodic maintenance
  162. Check paper size setting on control panel for drawer N
  163. Reboot the machine
  164. MAINTENANCE
  165. daily inspection
  166. cleaning the charger
  167. simple troubleshooting
  168. display does not change when buttons or icons are pressed
  169. image density is too high
  170. copy images are partially missing
  171. Table Of Contents
  172. e-studio352/452 specifications
  173. specifications of options
  174. packing list
  175. copying function combination matrix
  176. Combination Matrix 2/2
  177. Table Of Contents
  178. Table Of Contents
  179. Table Of Contents
e-STUDIO353 first page preview

e-STUDIO353

Brand: Toshiba | Category: Printer Accessories
Table of contents
  1. Software License Agreement
  2. limitation of liability
  3. Trademarks and Copyright
  4. Disclaimer Notice
  5. Preface
  6. Table Of Contents
  7. AXIS Network Print Server
  8. Overview
  9. Finishing options and logical printers
  10. Installation
  11. Configuration
  12. Copier model
  13. Only PCL available
  14. Available finisher options
  15. hole punch
  16. paper source
  17. General settings
  18. IPDS emulator
  19. Custom copier driver
  20. Problem Solving
  21. WorkStation Customization Object for TOSHIBA e-STUDIO
  22. Components
  23. Installation procedure
  24. Uninstallation
  25. Operation
  26. Print file script
  27. Appendix
  28. Printing character size - Reference values
  29. Definitions of Terms
e-STUDIO353 first page preview

e-STUDIO353

Brand: Toshiba | Category: All in One Printer
Table of contents
  1. service manual
  2. Table Of Contents
  3. Table Of Contents
  4. specifications
  5. system list
  6. outline of the machine
  7. electric parts layout
  8. symbols and functions of various components
  9. PC BOARDS
  10. general description
  11. copy process
  12. details of copying process
  13. general operation
  14. detection of abnormality
  15. Flow Chart
  16. Automatic paper feed copying
  17. CONTROL PANEL
  18. Items Shown on the Display Panel
  19. Display
  20. Relation between the Equipment State and Operator's Operation
  21. Description of Operation
  22. LED display circuit
  23. Disassembly and Replacement
  24. SCANNER
  25. Construction
  26. Scan motor
  27. Scanning drive circuit
  28. Initialization at power-ON
  29. Control of Exposure Lamp
  30. Exposure lamp
  31. Control circuit for the exposure lamp
  32. General Description of CCD Control
  33. Automatic Original Size Detection Circuit
  35. IMAGE PROCESSING
  36. Configuration
  37. SLG Board
  38. Functions of image processing circuit
  39. LGC Board
  40. Laser Driving PC Board (LDR board)
  41. laser optical unit
  42. laser diode
  43. polygonal motor
  44. paper feeding system
  45. drive system
  46. main motor
  47. drum related section
  48. drum temperature detection circuit
  49. development system
  50. Auto-Toner Circuit
  51. Function of auto-toner sensor
  52. Adjustment using the temperature / humidity sensor
  54. FUSER UNIT / PAPER EXIT SECTION
  55. Functions
  56. Heater Control Circuit
  57. Heating principle of IH Heater
  58. IH control circuit interface
  59. Relation between system configuration and IH output
  60. Temperature detection section
  61. Thermistor/heater status counter control
  62. Abnormality in the IH control circuit
  63. Control Circuit of Exit Motor
  65. AUTOMATIC DUPLEXING UNIT (ADU)
  66. Description of Operations
  67. Drive of ADU
  70. POWER SUPPLY UNIT
  71. Output Channel
  72. Fuse
  73. Configuration of Power Supply Unit
  74. Sequence of Power Supply
  75. AC Wire Harness
e-STUDIO353 first page preview

e-STUDIO353

Brand: Toshiba | Category: All in One Printer
Table of contents
  1. Table Of Contents
  2. Table Of Contents
  3. Table Of Contents
  4. Table Of Contents
  5. specifications
  6. SPECIFICATIONS / ACCESSORIES / OPTIONS / SUPPLIES 1
  7. Specifications
  8. Accessories
  9. Options
  10. e-STUDIO352/353/452/453
  11. ERROR CODE AND SELF-DIAGNOSTIC MODE
  12. Service call
  13. Error in Internet FAX / Scanning Function
  14. Printer function error
  15. Self-diagnosis Modes
  16. Input check (Test mode 03) (e-STUDIO350/450)
  17. Input check (Test mode 03) (e-STUDIO352/353/452/453)
  18. Output check (test mode 03)
  19. Test print mode (test mode 04)
  20. Adjustment mode (05) (e-STUDIO350/450)
  21. Adjustment mode (05) (e-STUDIO352/353/452/453)
  22. Setting mode (08) (e-STUDIO350/450)
  23. Setting mode (08) (e-STUDIO352/353/452/453)
  24. Pixel counter
  25. adjustment of auto-toner sensor
  26. Image Dimensional Adjustment
  27. Paper alignment at the registration roller
  28. Printer related adjustment
  29. Scanner related adjustment
  30. Image Quality Adjustment (Copying Function)
  31. Gamma slope adjustment
  32. Setting range correction
  33. Adjustment of smudged/faint text
  34. Image Quality Adjustment (Printing Function)
  35. Image Quality Adjustment (Scanning Function)
  36. Sharpness adjustment
  38. Adjustment of High-Voltage Transformer
  39. Precautions
  40. Adjustment of the Scanner Section
  41. Lens unit
  42. Adjustment of the Paper Feeding System
  43. Adjustment of Developer Unit
  44. Adjustment of the RADF (MR-3015)
  45. Adjustment of RADF height
  46. Adjustment of skew
  47. Automatic adjustment of sensors and initialization of EEPROM
  48. Adjustment of aligning
  49. Adjustment of aligning at reversing
  50. Adjustment of reverse solenoid
  51. Adjustment of RADF opening/closing switch
  52. Adjustment of RADF opening/closing sensor
  53. Adjustment of tray volume
  54. Adjustment of the RADF (MR-3018)
  57. Adjustment of the Leading Edge Position
  58. Adjustment of Horizontal Position
  59. Adjustment of Copy Ratio
  61. Adjustment of the Finisher (MJ-1022)
  62. Adjusting the angle of the jogging plate
  63. Adjusting the overlap of the sensor flag
  64. Adjusting the tension of the stack processing motor belt
  65. Releasing the stack tray guide lever fixing plate
  66. Adjustment of the upper tray angle
  67. DIP switch functions
  68. Adjustment of the Finisher (MJ-1023/1024)
  69. Adjusting the staple position (Finisher unit)
  70. Adjusting the folding position (Saddle stitcher unit)
  71. Fine adjustment of binding/folding position (Saddle stitcher unit)
  72. Sensor output adjustment (Puncher unit)
  73. Registering the number of punch holes (Puncher unit)
  74. Adjustment of the Finisher (MJ-1101)
  75. Adjusting the Stapling Position
  76. B4-size recycled paper mode settings
  77. Stopping Position Adjustment (MJ-6101:Puncher unit)
  78. Key Copy Counter (MU-8, MU-10)
  79. Adjustment of Dogleg
  80. PREVENTIVE MAINTENANCE (PM)
  81. Work flow of parts replacement
  82. Pages (e-STUDIO350/352/353) and 150,000 Output Pages (e-STUDIO450/452/453))
  83. Operational Items in Overhauling
  84. Cleaning the Units which Have Processed 60,000 Output Pages (e-STUDIO350/352/353 and 75,000 Output Pages (e-STUDIO450/452/453)
  85. Preventive Maintenance Checklist
  86. pm kit
  87. Jig List
  88. Grease List
  89. Precautions for Storing and Handling Supplies
  90. Checking and cleaning of photoconductive drum
  91. Checking and cleaning of drum cleaning blade
  92. Checking and replacing the cleaning roller
  93. TROUBLESHOOTING
  94. Paper misfeeding
  95. Cover open jam
  96. Transport jam (RADF)
  97. Finisher jam
  98. Drive system related service call
  99. Paper feeding system related service call
  100. Scanning system related service call
  101. Fuser unit related service call
  102. Fuse
  103. Communication related service call
  104. RADF related service call (MR-3015)
  105. RADF related service call (MR-3018)
  106. Finisher related service call
  107. Service call for others
  109. Image control related service call
  110. Troubleshooting for the Image
  111. Replacement of PC Boards and HDD
  112. Replacing SYS board
  113. Caution when Data overwrite kit (GP-1050/1060) is installed
  114. Replacing or clearing NVRAM
  115. FIRMWARE UPDATING
  116. Firmware Updating with Download Jig (e-STUDIO350/450)
  117. PWA-DWNLD-350-JIG2 (48 MB)
  118. PWA-DWNLD-350-JIG1 (16 MB)
  119. Writing the data to the download jig (PWA-DWNLD-350-JIG)
  120. K-PWA-DLM-320
  121. Firmware Updating with Download Jig (e-STUDIO352/353/452/453)
  125. Firmware Updating with FSMS (Field Service Manager) (e-STUDIO350/450)
  126. Firmware Updating with USB Storage Device (e-STUDIO350/450)
  127. Firmware Updating with USB Storage Device (e-STUDIO352/353/452/453)
  128. Appendix
  130. Output Channel
  131. Configuration of Power Supply Unit
  132. REMOTE SERVICE
  133. Setting Item
  134. Setting procedure
  135. Order Sheet Format
  136. Service Notification
  137. Items to be notified (e-STUDIO350/450)
  138. Setting (e-STUDIO352/353/452/453)
  139. Items to be notified (e-STUDIO352/353/452/453)
  140. DATA CLONING with USB STORAGE DEVICE (e-STUDIO352/353/452/453)
  141. WIRE HARNESS CONNECTION DIAGRAMS
e-STUDIO353 first page preview

e-STUDIO353

Brand: Toshiba | Category: All in One Printer
Table of contents
  1. Preface
  2. Table Of Contents
  3. OVERVIEW
  4. System Requirements
  5. Summary of Functions Newly Added
  6. PRINTING FUNCTIONS
  7. Setting Up Print Options
  8. Print Job Type
  9. INDEX
e-STUDIO353 first page preview

e-STUDIO353

Brand: Toshiba | Category: All in One Printer
Table of contents
  1. software license agreement
  2. limitation of liability
  3. trademarks and copyright
  4. about this guide
  5. To read manuals in PDF (Portable Document Format) files
  6. precautions in this manual
  7. Table Of Contents
  8. Table Of Contents
  9. Table Of Contents
  10. about scan features
  11. scan to file mode
  12. web service scan mode
  13. About Expansion Memories (only for e-STUDIO281c/351c/451c)
  14. About Scan Speed (only for e-STUDIO281c/351c/451c)
  15. how to perform scan operations
  16. confirming the scan job status
  17. confirming the scan log
  18. How to Perform Scan to e-Filing
  19. How to Use Scanned Data Stored in e-Filing
  20. how to perform scan to file
  21. how to use scanned data stored as files
  22. How to Perform Scan to E-mail
  23. Specifying Destinations
  24. using template
  25. scanning using template
  26. registering scan template
  27. How to Perform Copy & File
  28. about internet fax
  29. internet fax transmission overview
  30. how to perform internet fax
  32. advanced function
  33. priority transmission
  34. receiving internet fax
  35. installing remote scan driver
  36. installing the remote scan driver
  37. installing from topaccess
  38. uninstalling remote scan driver
  39. Repairing Remote Scan Driver
  40. scanning remotely using remote scan driver
  41. when you are running the first time
  42. configuring discovery settings
  43. how to use remote scan driver
  44. adding a new device using network discovery
  45. remote scan driver errors
  46. cannot acquire document
  47. planning and preparation
  48. how to perform web service scan operations
  49. INDEX
e-STUDIO353 first page preview

e-STUDIO353

Brand: Toshiba | Category: Digital systems
e-STUDIO353 first page preview

e-STUDIO353

Brand: Toshiba | Category: All in One Printer
Table of contents
  1. quick start guide
  2. TABLE OF CONTENTS
  3. Table Of Contents
  4. Table Of Contents
  5. PREFACE
  6. DISCLAIMER NOTICE
  7. SOFTWARE LICENSE AGREEMENT
  8. Limitation of Liability
  9. SECURITY PRECAUTIONS
  10. TRADEMARKS AND COPYRIGHT
  11. ITEMS INCLUDED WITH THE PRODUCT
  12. ABOUT OPTIONAL EXPANSION KITS
  13. LINEUP OF OUR MANUALS
  14. To read manuals in PDF (Portable Document Format) files
  15. ABOUT THE CD-ROM
  16. ABOUT THE CLIENT SOFTWARE
  17. Client Software for e-Filing Features
  18. system requirements
  19. SYSTEM REQUIREMENTS
  20. Scanning Features
  21. Electronic Filing (e-Filing) Features
  22. CONNECTING TO THE USB PORT
  23. CONNECTING TO THE NETWORK
  24. SETUP FLOW
  25. Table Of Contents
  26. OVERVIEW OF CONNECTIONS
  27. Available Features Under Each Connection
  28. internet connection
  29. ABOUT SETUP
  30. INITIAL DEVICE SETUP
  31. SETUP FLOW FOR TopAccess
  32. SETUP FLOW FOR USER MANAGEMENT
  33. Setup Flow for User Management Setting
  34. Setup Flow for User Authentication for Scan to E-mail
  35. SETUP FLOW FOR PRINTING FEATURES
  36. setup flow for usb printing
  37. setup flow for smb printing
  38. setup flow for ipp printing
  39. setup flow for printing via windows print server
  40. setup flow for novell printing
  41. Setup Flow for Macintosh Workstation
  42. setup flow for appletalk printing
  43. setup flow for lpr printing
  44. Setup Flow for UNIX Workstation
  45. Setup Flow for FTP Printing
  46. Setup Flow for E-mail Printing
  47. SETUP FLOW FOR SCANNING FEATURES
  48. Setup Flow for Scan to E-mail
  49. Setup Flow for Remote Scan
  50. SETUP FLOW FOR FAX FEATURES
  51. Setup Flow for Internet Fax
  52. Setup Flow for Onramp Gateway
  53. Setup Flow for Offramp Gateway
  54. SETUP FLOW FOR E-FILING FEATURE
  55. Setup Flow for e-Filing Client Software
Related products
e-STUDIO353Ce-STUDIO3530Ce-STUDIO355e-STUDIO357e-STUDIO352e-STUDIO350e-STUDIO356e-studio351ce-studio 353e-STUDIO3510
Toshiba categories
Laptop
Air Conditioner
TV
LCD TV
All in One Printer
LED TV
Projector
DVD Player
Storage
Heat Pump
More Toshiba categories
Product
Menu
Learn More
Menu
Legal
Menu
Copyright © 2024 OneStart. All Rights Reserved