Lenovo ThinkServer 1045 manuals
ThinkServer 1045
Table of contents
- Table Of Contents
- Table Of Contents
- safety information
- Chapter 1. General information
- Chapter 2. Server setup roadmap
- Chapter 3. Features and technologies
- Software programs
- serviceability
- Chapter 5. Diagnostics
- General problems
- Intermittent problems
- Memory problems
- Microprocessor problems
- Optional-device problems
- Power problems
- Serial port problems
- Universal Serial Bus (USB) port problems
- Solving Ethernet controller problems
- Event logs
- System event log
- Chapter 6. Locating parts, controls LEDs, and connectors
- Front control panel
- Locating server components
- Locating connectors on the backplane
- replacing hardware
- Handling static-sensitive devices
- Working inside the server with the power on
- Installing, removing, or replacing optional hardware devices
- installing a memory module
- removing a memory module
- Removing or installing internal drives
- installing the optical drive
- Removing or installing the riser card assembly
- Installing or removing a PCI card
- removing a pci card
- Installing, removing, or replacing hardware devices
- installing the system board battery
- Removing or installing the RAID controller
- Removing or installing the Ethernet card
- Removing or installing the microprocessor fan duct
- Removing or installing the power supply
- installing the power supply
- Removing or installing the heat sink
- Removing or installing the microprocessor
- installing the microprocessor
- Removing or installing the system board
- installing the system board
- Removing or installing the system fans
- installing the system fans
- Completing the parts replacement
- Connecting the cables
- Connecting external devices
- Chapter 8. Parts listing, RD240 Types 1045, 1046, 1047, and 1048
- Replaceable server components
- Power cords
- Ship group
- Chapter 9. Configuring the server
- Starting the Setup Utility program
- Using passwords
- Configuring the system fan speed
- Using the ThinkServer EasyStartup program
- Before you use the EasyStartup DVD
- Configuring RAID
- Connecting mini-SAS cable
- Starting the Configuration Utility program
- Accessing the Adapter Properties window
- SAS RAID settings
- Configuring the Gigabit Ethernet controller
- Using the EasyUpdate Firmware Updater program
- Appendix A. RAID battery card assembly
- Appendix B. Getting information help, and service
- Help and service
- Using other services
- Appendix C. Notices
- Trademarks
- Battery return program
- Requirement for batteries containing perchlorate
- Particulate contamination
- China RoHS
- Turkish statement of compliance
- Index
ThinkServer 1045
Table of contents
- user guide
- Table Of Contents
- Table Of Contents
- safety information
- Chapter 1. General information
- Chapter 2. Server setup road map
- Chapter 3. Features and technologies
- Software programs
- Chapter 4. Locating parts, controls LEDs, and connectors
- Front control panel
- Locating server components
- Locating parts on the system board
- Locating connectors on the backplane
- replacing hardware
- System reliability guidelines
- Working inside the server with the power on
- Installing, removing, or replacing optional hardware devices
- installing a memory module
- Removing or installing internal drives
- removing the optical drive
- installing the optical drive
- Removing or installing the riser card assembly
- Installing or removing a PCI card
- removing a pci card
- Installing, removing, or replacing hardware devices
- installing the system board battery
- Removing or installing the RAID controller
- Removing or installing the Ethernet card
- duct
- Removing or installing the power supply
- installing the power supply
- Removing or installing the system fans
- installing the system fans
- Removing or installing the heat sink
- Removing or installing the microprocessor
- installing the microprocessor
- Completing the parts replacement
- Turning on the server
- Connecting external devices
- Chapter 6. Configuring the server
- Starting the Setup Utility program
- Using passwords
- RAID controllers
- Using the ThinkServer EasyStartup program
- Configuring RAID
- Onboard 1068E SAS RAID controller Configuration Utility program
- Starting the Configuration Utility program
- Accessing the Adapter Properties window
- SAS RAID settings
- Accessing the SAS Topology window
- Updating the firmware
- Chapter 7. Troubleshooting
- General problems
- Keyboard, mouse, or pointing-device problems
- Microprocessor problems
- Monitor problems
- Optional-device problems
- Power problems
- Serial port problems
- Software problems
- Solving Ethernet controller problems
- Event logs
- Viewing event logs without restarting the server
- Appendix A. RAID battery card assembly
- Appendix B. Getting information help, and service
- Help and service
- Using other services
- Appendix C. Notices
- Trademarks
- Battery return program
- Requirement for batteries containing perchlorate
- Particulate contamination
- China RoHS
- Turkish statement of compliance
- Index
ThinkServer 1045
Table of contents
- Table Of Contents
- Table Of Contents
- Chapter 1. General information
- Related documentation
- Chapter 2. Server setup roadmap
- Chapter 3. Features and technologies
- Specifications
- Software programs
- Chapter 4. Locating parts, controls LEDs, and connectors
- Front control panel
- Locating server components
- Locating parts on the system board
- Locating connectors on the backplane
- Chapter 5. Installing, removing, or replacing hardware
- System reliability guidelines
- Working inside the server with the power on
- Installing, removing, or replacing optional hardware devices
- installing a memory module
- removing a memory module
- Removing or installing internal drives
- removing the optical drive
- installing the optical drive
- installing a hot-swap hard disk drive
- Removing or installing the riser card assembly
- Installing or removing a PCI card
- removing a pci card
- Installing, removing, or replacing hardware devices
- installing the system board battery
- Removing or installing the 8708ELP RAID controller
- Removing or installing the Ethernet card
- Removing or installing the microprocessor fan duct
- Removing or installing the power supply
- installing the power supply
- Removing or installing the system fans
- installing the system fans
- Removing or installing the heat sink
- installing the heat sink
- Removing or installing the microprocessor
- installing the microprocessor
- Completing the parts replacement
- Updating the server configuration
- Connecting external devices
- Copyright Lenovo
- Starting the Setup Utility program
- Using passwords
- RAID controllers
- Using the ThinkServer EasyStartup program
- Configuring RAID
- Onboard 1068E SAS RAID controller Configuration Utility program
- Accessing the Adapter Properties window
- SAS RAID settings
- Creating or deleting the RAID 1 array
- Configuring the Gigabit Ethernet controller
- Installing the ThinkServer EasyManage program
- Chapter 7. Troubleshooting
- General problems
- Intermittent problems
- Memory problems
- Microprocessor problems
- Monitor problems
- Optional-device problems
- Power problems
- Serial port problems
- Universal Serial Bus (USB) port problems
- Solving undetermined problems
- Event logs
- System event log
- assembly
- Appendix B. Getting help and technical assistance
- Calling for service
- Purchasing additional services
- Appendix C. Notices
- Trademarks
- Product recycling and disposal
- Particulate contamination
- Compliance with Republic of Turkey Directive on the Restriction of Hazardous Substances
- German Ordinance for Work gloss statement
- Electronic emission notices
- Germany Class A compliance statement
- Japan Voluntary Control Council for Interference VCCI) statement
- Korea Class A warning statement
- Index
ThinkServer 1045
Table of contents
- Table Of Contents
- Table Of Contents
- Chapter 1. About this manual
- Safety statements
- Important information about replacing RoHS compliant FRUs
- Chapter 2. General information
- Software programs
- Chapter 3. Diagnostics
- General problems
- Intermittent problems
- Memory problems
- Microprocessor problems
- Optional-device problems
- Power problems
- Serial port problems
- Software problems
- Solving Ethernet controller problems
- Event logs
- System event log
- Chapter 4. Locating parts, controls LEDs, and connectors
- Front control panel
- Locating server components
- Locating connectors on the backplane
- Chapter 5. Replacing FRUs
- System reliability guidelines
- Guidelines for servicing electrical equipment
- Working inside the server with the power on
- Removing the server cover
- Installing, removing, or replacing optional hardware devices
- installing a memory module
- removing a memory module
- Removing or installing internal drives
- installing the optical drive
- Removing or installing the riser card assembly
- Installing or removing a PCI card
- Installing, removing, or replacing hardware devices
- installing the system board battery
- Removing or installing the RAID controller
- Removing or installing the Ethernet card
- Removing or installing the microprocessor fan duct
- Removing or installing the power supply
- removing the power supply
- installing the power supply
- Removing or installing the heat sink
- Removing or installing the microprocessor
- installing the microprocessor
- Removing or installing the system board
- installing the system board
- Removing or installing the system fans
- installing the system fans
- Completing the parts replacement
- Connecting the cables
- Turning off the server
- Chapter 6. Parts listing, RD240 Types 1045, 1046, 1047, and 1048
- Replaceable server components
- Power cords
- Ship group
- Chapter 7. Configuring the server
- Starting the Setup Utility program
- Using passwords
- RAID controllers
- Before you use the EasyStartup DVD
- Configuring RAID
- Onboard 1068E SAS RAID controller Configuration Utility program
- Accessing the Adapter Properties window
- Creating or deleting the RAID 1 array
- Configuring the Gigabit Ethernet controller
- Installing the ThinkServer EasyManage program
- Appendix A. RAID battery card assembly
- Appendix B. Getting help and technical assistance
- Using other services
- Purchasing additional services
- Appendix C. Notices
- Trademarks
- Particulate contamination
- Compliance with Republic of Turkey Directive on the Restriction of Hazardous Substances
- German Ordinance for Work gloss statement
- European Union EMC Directive conformance statement
- Japan Voluntary Control Council for Interference (VCCI) statement
- Korea Class A warning statement
- Index
ThinkServer 1045
Table of contents
- Table Of Contents
- Table Of Contents
- safety information
- Chapter 1. General information
- Related documentation
- Chapter 2. Server setup road map
- Chapter 3. Features and technologies
- Software programs
- Chapter 4. Locating parts, controls LEDs, and connectors
- Front control panel
- Locating server components
- Locating parts on the system board
- Locating connectors on the backplane
- Chapter 5. Installing, removing, or replacing hardware
- System reliability guidelines
- Working inside the server with the power on
- Installing, removing, or replacing optional hardware devices
- installing a memory module
- Removing or installing internal drives
- removing the optical drive
- installing the optical drive
- Removing or installing the riser card assembly
- Installing or removing a PCI card
- removing a pci card
- Installing, removing, or replacing hardware devices
- installing the system board battery
- Removing or installing the RAID controller
- Removing or installing the Ethernet card
- Removing or installing the microprocessor fan duct
- Removing or installing the power supply
- installing the power supply
- Removing or installing the system fans
- installing the system fans
- Removing or installing the heat sink
- Removing or installing the microprocessor
- installing the microprocessor
- Completing the parts replacement
- Turning on the server
- Connecting external devices
- Chapter 6. Configuring the server
- Starting the Setup Utility program
- Using passwords
- RAID controllers
- Using the ThinkServer EasyStartup program
- Configuring RAID
- Onboard 1068E SAS RAID controller Configuration Utility program
- Starting the Configuration Utility program
- Accessing the Adapter Properties window
- SAS RAID settings
- Accessing the SAS Topology window
- Updating the firmware
- Chapter 7. Troubleshooting
- General problems
- problems
- Microprocessor problems
- Monitor problems
- Optional-device problems
- Power problems
- Serial port problems
- Software problems
- Universal Serial Bus (USB) port problems
- Solving undetermined problems
- Event logs
- System event log
- Appendix A. RAID battery card assembly
- Appendix B. Getting help and technical assistance
- Lenovo Support Web site
- Using other services
- Appendix C. Notices
- Trademarks
- Particulate contamination
- Turkish statement of compliance
- German Ordinance for Work gloss statement
- Index
ThinkServer 1045
Table of contents
- Table Of Contents
- Table Of Contents
- Capítulo 1. Información general
- Capítulo 2. Itinerario de la configuración del servidor
- tecnologías
- Especificaciones
- Programas de software
- Capítulo 4. Localización de piezas controles, LED y conectores
- Panel de control frontal
- Ubicación de componentes del servidor
- Ubicación de las piezas en la placa del sistema
- Ubicación de los conectores en la placa posterior
- sustitución de hardware
- Directrices de fiabilidad del sistema
- alimentación activada
- Instalación, extracción o sustitución de dispositivos de hardware opcionales
- Instalación o extracción de un módulo de memoria
- Extracción o instalación de unidades internas
- Extracción o instalación del conjunto de la tarjeta de expansión
- Instalación o extracción de una tarjeta PCI
- de hardware
- Extracción o instalación del controlador RAID
- Extracción o instalación de la tarjeta Ethernet
- Extracción o instalación del conducto del ventilador del microprocesador
- Extracción o instalación de la fuente de alimentación
- Extracción o instalación de los ventiladores del sistema
- Extracción o instalación del disipador de calor
- Extracción o instalación del microprocesador
- Cómo finalizar la sustitución de piezas
- Conexión de los cables
- Conexión de dispositivos externos
- servidor
- Inicio del programa Setup Utility
- Utilización de contraseñas
- Controladores RAID
- Antes de utilizar el DVD EasyStartup
- Configuración RAID
- Programa Configuración Utility del controlador RAID SAS 1068E incorporado
- Inicio del programa Configuration Utility
- Acceso a la ventana Adapter Properties
- Valores de RAID SAS
- Acceso a la ventana SAS Topology
- Actualización del firmware
- Instalar el programa ThinkServer EasyManage
- problemas
- Problemas generales
- Problemas intermitentes
- Problemas de memoria
- Problemas de microprocesador
- Problemas de dispositivos opcionales
- Problemas del puerto serie
- Problemas de puerto USB (Universal Serial Bus)
- Resolución de problemas del controlador Ethernet
- Registros de sucesos
- Visualización de los registros de sucesos sin reiniciar el servidor
- Apéndice A. Conjunto de la tarjeta de la batería RAID
- Apéndice B. Obtención de información, ayuda y servicio
- Sitio web de soporte de Lenovo
- Utilización de otros servicios
- Apéndice C. Avisos
- Marcas registradas
- Información sobre el reciclaje
- Programa de devolución de la batería
- Contaminación por partículas
- Información importante para la European Directive 2002/96/EC
- China RoHS
- Ordenanza alemana para la declaración de respetabilidad
- Índice
ThinkServer 1045
Table of contents
- Table Of Contents
- Table Of Contents
- Chapitre 1. Informations générales
- Chapitre 2. Feuille de route pour la configuration du serveur
- Chapitre 3. Caractéristiques et technologies
- Caractéristiques
- Logiciels
- composants, boutons de commande voyants et connecteurs
- Panneau de commande frontal
- Emplacement des composants du serveur
- Emplacement des composants sur la carte mère
- Emplacement des connecteurs sur le fond de panier
- Chapitre 5. Installation, retrait ou remplacement de matériel
- Consignes relatives à la fiabilité du système
- Intervention à l'intérieur d'un serveur sous tension
- Installation, retrait ou remplacement de matériel en option
- Retrait ou installation d'unités internes
- Retrait ou installation de la carte adaptatrice de connexion
- Installation ou retrait d'une carte PCI
- Installation, retrait ou remplacement de matériel
- Retrait et installation du contrôleur RAID
- Retrait ou installation de la carte Ethernet
- Retrait et installation du conduit d'air du microprocesseur
- Retrait ou installation du bloc d'alimentation
- Retrait ou installation des ventilateurs système
- Retrait ou installation du dissipateur thermique
- Retrait et installation du microprocesseur
- installation du microprocesseur
- Fin du remplacement de composants
- Connexion des câbles
- Connexion de périphériques externes
- Chapitre 6. Configuration du serveur
- Démarrage de Setup Utility
- Utilisation de mots de passe
- Contrôleurs RAID
- Avant d'utiliser le DVD EasyStartup
- Configuration RAID
- Utilitaire de configuration du contrôleur RAID 1068E SAS intégré
- Lancement de l'utilitaire de configuration
- Accès à la fenêtre Adapter Properties
- Paramètres RAID SAS
- Création ou suppression de la batterie de disques RAID 1
- Configuration du contrôleur Gigabit Ethernet
- EasyManage
- Chapitre 7. Identification et résolution des incidents
- Incidents généraux
- Incidents intermittents
- Incidents liés à la mémoire
- Incidents liés au microprocesseur
- Incidents liés aux périphériques en option
- Incidents liés au port série
- Incidents liés aux ports USB
- Résolution des incidents liés au contrôleur Ethernet
- Journaux des événements
- Affichage des journaux des événements sans redémarrer le serveur
- Système de débogage Digitron intégré
- Annexe A. Carte batterie RAID
- Annexe B. Assistance technique
- Site Web du support Lenovo
- Utilisation d'autres services
- Annexe C. Remarques
- Marques
- Informations sur le recyclage
- batteries
- Contamination particulaire
- Informations importantes sur la Directive européenne 2002/96/CE
- Directive RoHS (Restriction of Hazardous Substances)
- Directive RoHS pour la Chine
- Directive allemande concernant la luminosité
- Index
ThinkServer 1045
Table of contents
- Table Of Contents
- Table Of Contents
- Capitolo 1. Informazioni generali
- Capitolo 2. Guida orientativa di configurazione del server
- Capitolo 3. Funzioni e tecnologie
- Specifiche
- Programmi software
- Capitolo 4. Individuazione di parti controlli, LED e connettori
- Pannello di controllo anteriore
- Individuazione dei componenti del server
- Individuazione di parti sulla scheda di sistema
- Individuazione dei connettori sul backplane
- sostituzione dell'hardware
- Linee guida di affidabilità del sistema
- Esecuzione di operazioni all'interno del server acceso
- Installazione, rimozione o sostituzione di periferiche hardware facoltative
- installazione di un modulo di memoria
- Rimozione o installazione di unità interne
- Rimozione o installazione dell'assieme della scheda verticale
- Installazione o rimozione di una scheda PCI
- installazione di una scheda pci
- rimozione di una scheda pci
- Installazione, rimozione o sostituzione di periferiche hardware
- Rimozione o installazione del controller RAID
- Rimozione o installazione della scheda Ethernet
- Rimozione o installazione del condotto della ventola del microprocessore
- Rimozione o installazione dell'alimentatore
- Rimozione e installazione delle ventole di sistema
- Rimozione o installazione del dispersore di calore
- Rimozione o installazione del microprocessore
- installazione del microprocessore
- Operazioni finali di sostituzione dei componenti
- Collegamento dei cavi
- Connessione di dispositivi esterni
- Capitolo 6. Configurazione del server
- Avvio del programma Setup Utility
- Utilizzo delle password
- Controller RAID
- Informazioni preliminari all'utilizzo del DVD EasyStartup
- Configurazione di RAID
- Programma Configuration Utility del controller RAID SAS 1068E sulla scheda
- Avvio del programma Configuration Utility
- Accesso alla finestra Adapter Properties
- Impostazioni RAID SAS
- Accesso alla finestra SAS Topology
- Utilizzo del programma EasyUpdate Firmware Updater
- problemi
- Problemi generici
- altro dispositivo di puntamento
- Problemi di memoria
- Problemi al microprocessore
- Problemi relativi alle periferiche facoltative
- Problemi relativi all'alimentazione
- Problemi relativi alla porta seriale
- Problemi relativi al software
- Risoluzione dei problemi di alimentazione
- Risoluzione di problemi indeterminati
- Log eventi
- Log eventi del sistema
- Appendice A. Assieme della scheda della batteria RAID
- informazioni, supporto e assistenza
- Sito Web dell'assistenza Lenovo
- Utilizzo di altri servizi
- Appendice C. Informazioni particolari
- Note importanti
- Programma per la restituzione delle batterie
- Requisiti per le batterie contenenti perclorato
- Contaminazione particellare
- Direttiva RoHS (Restriction of Hazardous Substances)
- Cina RoHS
- German Ordinance for Work gloss statement
- Indice
ThinkServer 1045
Table of contents
- Table Of Contents
- Table Of Contents
- Kapitel 1. Allgemeine Informationen
- Servereinrichtung
- Kapitel 3. Produktmerkmale und Technologien
- Technische Daten
- Softwareprogramme
- Zuverlässigkeit, Verfügbarkeit und Wartungsfreundlichkeit
- Steuerelemente, Anzeigen und Anschlüsse
- Vordere Steuerkonsole
- Positionen der Serverkomponenten
- Positionen der Komponenten auf der Systemplatine
- Position der Anschlüsse auf der Rückwandplatine
- Kapitel 5. Hardware installieren entfernen oder austauschen
- Richtlinien zur Systemzuverlässigkeit
- Server arbeiten
- Hardwarezusatzeinrichtungen installieren entfernen oder austauschen
- Speichermodul installieren oder entfernen
- speichermodul installieren
- speichermodul entfernen
- Interne Laufwerke entfernen oder installieren
- Adapterkartenbaugruppe entfernen oder installieren
- adapterkartenbaugruppe installieren
- PCI-Karte installieren oder entfernen
- Hardwareeinheiten installieren, entfernen oder austauschen
- RAID-Controller entfernen oder installieren
- Ethernet-Karte entfernen oder installieren
- Mikroprozessorlüfterführung entfernen oder installieren
- Netzteil entfernen oder installieren
- netzteil entfernen
- Systemlüfter entfernen oder installieren
- Kühlkörper entfernen oder installieren
- Mikroprozessor entfernen oder installieren
- mikroprozessor installieren
- Austausch von Komponenten abschließen
- Kabel anschließen
- Externe Einheiten anschließen
- Kapitel 6. Server konfigurieren
- Programm „Setup Utility" starten
- Kennwörter verwenden
- RAID-Controller
- Vor Verwendung der DVD „EasyStartup
- RAID konfigurieren
- Konfigurationsdienstprogramm für den integrierten 1068E-SAS-RAID-Controller
- Programm „Configuration Utility" starten
- Auf das Fenster „Adapter Properties Adaptereigenschaften) zugreifen
- SAS-RAID-Einstellungen
- Auf das Fenster „SAS Topology" zugreifen
- Programm „EasyUpdate Firmware Updater verwenden
- Kapitel 7. Fehlerbehebung
- Allgemeine Fehler
- Sporadisch auftretende Fehler
- Speicherfehler
- Mikroprozessorfehler
- Bildschirmfehler
- Fehler an Zusatzeinrichtungen
- Fehler an den seriellen Anschlüssen
- Fehler am USB-Anschluss
- Fehler am Ethernet-Controller beheben
- Ereignisprotokolle
- Diagnoseanzeigen im Bedienfeld an der Vorderseite
- Anhang A. RAID-Akkukarte
- Anhang B. Informationen, Hilfe und Service anfordern
- Lenovo Unterstützungswebsite
- Andere Services in Anspruch nehmen
- Anhang C. Bemerkungen
- Marken
- Informationen zur Wiederverwertung/Entsorgung
- Batterierücknahmeprogramm
- Anforderung an Batterien mit Perchlorat
- Wichtige Informationen zur European Directive 2002/96/EC
- gefährlicher Stoffe (RoHS = Restriction of Hazardous Substances Directive)
- China RoHS
- Bildschirmarbeitsverordnung
- Index