Lenovo ThinkAgile VX2320 manuals
ThinkAgile VX2320
Table of contents
- Table Of Contents
- Chapter 1. Introduction
- Typical vSAN architecture
- Specifications
- Management options
- Chapter 2. Server components
- Operator information panel
- Rear view
- Rear view LEDs
- System board components
- System board LEDs
- Power cords
- Chapter 3. Network/Infrastructure Planning
- Chapter 4. Server setup checklist
- Cable the server
- Power off the server
- Chapter 5. Installing and configuring vCSA
- Running the ThinkAgile Installer
- Installing and configuring vCSA manually
- Chapter 6. Installing and Setting up Lenovo XClarity Administrator
- Managing ThinkSystem VX7Y13 Series Servers
- Chapter 7. Installing and Setting up Lenovo XClarity Integrator
- Copyright Lenovo
- System reliability guidelines
- Working inside the server with the power on
- Hot-swap drive replacement
- Install a hot-swap drive
- Hot-swap power supply replacement
- Remove a hot-swap power supply
- Install a hot-swap power supply
- System fan replacement
- Install a system fan
- RAID adapter (HBA) replacement
- Install the RAID adapter
- LOM adapter replacement
- Remove the LOM adapter
- Install the LOM adapter
- PCIe adapter replacement
- Install a PCIe adapter
- DIMM replacement
- Remove a DIMM
- DIMM installation rules
- Install a DIMM
- M.2 backplane and M.2 drive replacement
- Adjust the retainer on the M.2 backplane
- Install the M.2 backplane and M.2 drive
- Chapter 9. Updating firmware
- Appendix A. Configuration settings
- Appendix B. Getting help and technical assistance
- Appendix C. Trademarks
- Index