Lenovo ThinkAgile HX5521 manuals
ThinkAgile HX5521
Table of contents
- Table Of Contents
- Chapter 1. Introduction
- Typical Nutanix architecture
- HX deployment architecture
- Identifying your server
- Management options
- Chapter 2. Server components
- Front I/O assembly
- Rear view
- Rear view LEDs
- System board components
- System board LEDs
- Parts list
- Power cords
- Chapter 3. Network/Infrastructure Planning
- Chapter 4. Server setup checklist
- Cable the server
- Power on the server
- a cluster on ThinkAgile HX Series servers
- Chapter 6. Installing and setting up Lenovo XClarity Administrator
- Chapter 7. Installing and setting up Lenovo XClarity Integrator
- Chapter 8. Hardware replacement procedures
- System reliability guidelines
- Working inside the server with the power on
- Hot-swap drive replacement
- Install a hot-swap drive
- Hot-swap power supply replacement
- Install a hot-swap power supply
- System fan replacement
- Remove a system fan
- Install a system fan
- HBA replacement
- Remove the HBA
- Install the HBA
- LOM adapter replacement
- Remove the LOM adapter
- Install the LOM adapter
- PCIe adapter replacement
- Install a PCIe adapter on the riser assembly
- DIMM replacement
- DIMM installation rules
- Install a DIMM
- M.2 backplane and M.2 drive replacement
- Adjust the retainer on the M.2 backplane
- Install the M.2 backplane and M.2 drive
- Chapter 9. Updating firmware
- Appendix A. Configuration settings
- Appendix B. Getting help and technical assistance
- Appendix C. Trademarks
- Index