OneStart

Cisco PAP2T manuals

PAP2T first page preview

PAP2T

Brand: Cisco | Category: VoIP
Table of contents
PAP2T first page preview

PAP2T

Brand: Cisco | Category: Adapter
Table of contents
  1. Table Of Contents
  2. Table Of Contents
  3. Table Of Contents
  4. Table Of Contents
  5. Table Of Contents
  6. Table Of Contents
  7. Table Of Contents
  8. About This Document
  9. document conventions
  10. finding text in a pdf
  11. Comparison of ATA Devices
  12. ATA Connectivity Requirements
  13. PAP2T Connectivity
  14. SPA2102 Connectivity
  15. SPA3102 Connectivity
  16. SPA8000 Connectivity
  17. SPA8800 Connectivity
  18. ATA Software Features
  19. SIP Proxy Redundancy
  20. Basic Services and Equipment Required
  21. Downloading Firmware
  22. Setting up Your ATA Device
  23. Using the Administration Web Server
  24. Connecting to the Administration Web Server
  25. Registering to the Service Provider
  26. Advanced Configurations
  27. Resync URL
  28. Provisioning Your ATA Device
  29. Configuration Profile
  30. Network Address Translation (NAT) and Voice over IP (VoIP)
  31. NAT Mapping with Session Border Controller
  32. Configuring NAT Mapping with STUN
  33. Determining the Router's NAT Mechanism
  34. Firewalls and SIP
  35. Supported Codecs
  36. Using a FAX Machine
  37. Fax Troubleshooting
  38. Managing Caller ID Service
  39. silence suppression and comfort noise generation
  40. Configuring Dial Plans
  41. digit sequence examples
  42. Editing Dial Plans
  43. Secure Call Implementation
  44. Secure Call Details
  45. Using a Mini-Certificate
  46. configuring voice services
  47. SIP Trunking and Hunt Groups on the SPA8000
  48. About SIP Trunking
  49. Setting the Trunk Group Call Capacity
  50. Contact List for a Trunk Group
  51. Outgoing Call Routing for a Trunk Group
  52. Configuring a Trunk Group
  53. Trunk Group Management
  54. Setting the Hunt Policy
  55. Using the Internal Music Source for Music On Hold
  56. Changing the Music File for the Internal Music Source
  57. Configuring a Streaming Audio Server
  58. Configuring the Streaming Audio Server
  59. Using the IVR with an SAS Line
  60. Connecting to PSTN and VoIP Services
  61. How VoIP-To-PSTN Calls Work
  62. Two-Stage Dialing (SPA3102)
  63. How PSTN-To-VoIP Calls Work
  64. Terminating Gateway Calls
  65. VoIP Outbound Call Routing (SPA3102)
  66. Configuring VoIP Failover to PSTN
  67. PSTN Call to Ring Line 1 (SPA3102)
  68. Call Progress Tones (SPA3102 and SPA8800)
  69. PSTN to VoIP Call with and Without Ring-Thru
  70. Call Forwarding to PSTN Gateway (SPA3102 and SPA8800)
  71. Router Status page
  72. System Status section
  73. WAN Status page
  74. Static IP Settings section
  75. Optional Settings section
  76. MAC Clone Settings section
  77. VLAN Settings section
  78. LAN Networking Settings section
  79. Port Forwarding Settings section
  80. Miscellaneous Settings section
  81. Info page
  82. Line Status section
  83. System Information section (PAP2T)
  84. Trunk Status section (SPA8000)
  85. System page
  86. Internet Connection Type section (PAP2T)
  87. Miscellaneous Settings section (not used with PAP2T)
  88. SIP page
  89. SIP Timer Values (sec) section
  90. Response Status Code Handling section
  91. RTP Parameters section
  92. SDP Payload Types section
  93. NAT Support Parameters section
  94. Trunking Parameters section (SPA8000)
  95. Regional page
  96. Call Progress Tones section
  97. Distinctive Ring Patterns section
  98. Distinctive Call Waiting Tone Patterns section
  99. Distinctive Ring/CWT Pattern Names section
  100. Ring and Call Waiting Tone Spec section
  101. Control Timer Values (sec) section
  102. Vertical Service Activation Codes section
  103. Vertical Service Announcement Codes section (SPA2102, SPA8000)
  104. Miscellaneous section
  105. Line page
  106. Line Enable section
  107. Streaming Audio Server (SAS) section
  108. NAT Settings section
  109. Network Settings section
  110. SIP Settings section
  111. Call Feature Settings section
  112. Proxy and Registration section
  113. Subscriber Information section
  114. Supplementary Service Subscription section
  115. Audio Configuration section
  116. Gateway Accounts section (SPA3102)
  117. Dial Plan section
  118. FXS Port Polarity Configuration section
  119. PSTN-To-VoIP Gateway Setup section (SPA8800)
  120. FXO Timer Values (sec) section (SPA8800)
  121. PSTN Disconnect Detection section (SPA8800)
  122. International Control section (SPA8800)
  123. PSTN Line page (SPA3102)
  124. Dial Plans section
  125. VoIP Users and Passwords (HTTP Authentication) section
  126. Ring Settings section
  127. PSTN Disconnect Detection section
  128. International Control (Settings) section
  129. User page
  130. Call Forward Settings section
  131. Selective Call Forward Settings section
  132. Supplementary Service Settings section
  133. Distinctive Ring Settings section
  134. PSTN User page (SPA3102)
  135. PSTN Ring Thru Line 1 Ring Settings section
  136. troubleshooting
  137. environmental specifications
  138. SPA8800
  139. where to go from here
  140. related documentation
PAP2T first page preview

PAP2T

Brand: Cisco | Category: Adapter
Table of contents
  1. Table Of Contents
  2. Table Of Contents
  3. Table Of Contents
  4. Table Of Contents
  5. Table Of Contents
  6. Table Of Contents
  7. Table Of Contents
  8. About This Document
  9. document conventions
  10. finding information in pdf files
  11. finding text in multiple pdf files
  12. Chapter 1: Introducing Cisco Small Business Analog Telephone Adapters
  13. Comparison of ATA Devices
  14. ATA Connectivity Requirements
  15. PAP2T Connectivity
  16. SPA2102 Connectivity
  17. SPA3102 Connectivity
  18. SPA8000 Connectivity
  19. SPA8800 Connectivity
  20. ATA Software Features
  21. SIP Proxy Redundancy
  22. Chapter 2: Basic Administration and Configuration
  23. Downloading Firmware
  24. Setting up Your ATA Device
  25. Using the Administration Web Server
  26. Connecting to the Administration Web Server
  27. Registering to the Service Provider
  28. Advanced Configurations
  29. Resync URL
  30. Provisioning Your ATA Device
  31. Configuration Profile
  32. Chapter 3: Configuring Your System for ITSP Interoperability
  33. NAT Mapping with Session Border Controller
  34. Configuring NAT Mapping with STUN
  35. Determining the Router's NAT Mechanism
  36. Firewalls and SIP
  37. Chapter 4: Configuring Voice Services
  38. Using a FAX Machine
  39. Fax Troubleshooting
  40. Managing Caller ID Service
  41. Silence Suppression and Comfort Noise Generation
  42. Configuring Dial Plans
  43. digit sequence examples
  44. Editing Dial Plans
  45. Secure Call Implementation
  46. Secure Call Details
  47. Using a Mini-Certificate
  48. SIP Trunking and Hunt Groups on the SPA8000
  49. About SIP Trunking
  50. Setting the Trunk Group Call Capacity
  51. Contact List for a Trunk Group
  52. Outgoing Call Routing for a Trunk Group
  53. Configuring a Trunk Group
  54. Trunk Group Management
  55. Setting the Hunt Policy
  56. Chapter 5: Configuring Music on Hold
  57. Changing the Music File for the Internal Music Source
  58. Configuring a Streaming Audio Server
  59. Configuring the Streaming Audio Server
  60. Using the IVR with an SAS Line
  61. Chapter 6: Configuring the PSTN (FXO) Gateway on the SPA3102
  62. How VoIP-To-PSTN Calls Work
  63. Two-Stage Dialing (SPA3102)
  64. How PSTN-To-VoIP Calls Work
  65. Terminating Gateway Calls
  66. VoIP Outbound Call Routing (SPA3102)
  67. Configuring VoIP Failover to PSTN
  68. PSTN Call to Ring Line 1 (SPA3102)
  69. Call Progress Tones (SPA3102 and SPA8800)
  70. PSTN to VoIP Call with and Without Ring-Thru
  71. Call Forwarding to PSTN Gateway (SPA3102 and SPA8800)
  72. Router Status
  73. Product Information section
  74. WAN Status
  75. Static IP Settings section
  76. Optional Settings section
  77. MAC Clone Settings section
  78. VLAN Settings section
  79. LAN Networking Settings section
  80. Port Forwarding Settings section
  81. Miscellaneous Settings section
  82. Info
  83. System Status section
  84. System Information section (PAP2T)
  85. Trunk Status section (SPA8000)
  86. System
  87. Internet Connection Type section (PAP2T)
  88. Miscellaneous Settings section (not used with PAP2T)
  89. SIP Parameters section
  90. SIP Timer Values (sec) section
  91. Response Status Code Handling section
  92. RTP Parameters section
  93. SDP Payload Types section
  94. NAT Support Parameters section
  95. Trunking Parameters section (SPA8000)
  96. Regional
  97. Call Progress Tones section
  98. Distinctive Ring Patterns section
  99. Distinctive Call Waiting Tone Patterns section
  100. Distinctive Ring/CWT Pattern Names section
  101. Ring and Call Waiting Tone Spec section
  102. Control Timer Values (sec) section
  103. Vertical Service Activation Codes section
  104. Vertical Service Announcement Codes section (SPA2102, SPA8000)
  105. Miscellaneous section
  106. Line
  107. Line Enable section
  108. Streaming Audio Server (SAS) section
  109. NAT Settings section
  110. Network Settings section
  111. SIP Settings section
  112. Call Feature Settings section
  113. Proxy and Registration section
  114. Subscriber Information section
  115. Supplementary Service Subscription section
  116. Audio Configuration section
  117. Gateway Accounts section (SPA3102)
  118. VoIP Fallback to PSTN section (SPA3102 and SPA8800)
  119. FXS Port Polarity Configuration section
  120. VoIP-to-PSTN Gateway Setup section (SPA8800)
  121. FXO Timer Values (sec) section (SPA8800)
  122. PSTN Disconnect Detection section (SPA8800)
  123. International Control section (SPA8800)
  124. Trunk Group page (SPA8000)
  125. Dial Plan section
  126. PSTN Line page (SPA3102)
  127. Dial Plans section
  128. VoIP Users and Passwords (HTTP Authentication) section
  129. Ring Settings section
  130. PSTN Disconnect Detection section
  131. International Control (Settings) section
  132. User
  133. Call Forward Settings section
  134. Selective Call Forward Settings section
  135. Supplementary Service Settings section
  136. Distinctive Ring Settings section
  137. PSTN User page (SPA3102)
  138. PSTN-To-VoIP Speed Dial Settings section
  139. PAP2T
  140. SPA2102
  141. SPA8000
  142. WRTP54G
  143. product resources
  144. related documentation
PAP2T first page preview

PAP2T

Brand: Cisco | Category: Adapter
Table of contents
  1. Table Of Contents
  2. Table Of Contents
  3. Table Of Contents
  4. Table Of Contents
  5. Table Of Contents
  6. Table Of Contents
  7. Table Of Contents
  8. Chapter 1: Introducing Cisco Small Business Analog Telephone Adapters
  9. Comparison of ATA Devices
  10. ATA Connectivity Requirements
  11. PAP2T Connectivity
  12. SPA2102 Connectivity
  13. SPA3102 Connectivity
  14. SPA8000 Connectivity
  15. SPA8800 Connectivity
  16. ATA Software Features
  17. SIP Proxy Redundancy
  18. Other ATA Software Features
  19. Chapter 2: Basic Administration and Configuration
  20. Downloading Firmware
  21. Setting up Your ATA Device
  22. Using the Administration Web Server
  23. Connecting to the Administration Web Server
  24. Registering to the Service Provider
  25. Advanced Configurations
  26. Resync URL
  27. Provisioning Your ATA Device
  28. Configuration Profile
  29. Chapter 3: Configuring Your System for ITSP Interoperability
  30. NAT Mapping with Session Border Controller
  31. Configuring NAT Mapping with STUN
  32. Determining the Router’s NAT Mechanism
  33. Firewalls and SIP
  34. Chapter 4: Configuring Voice Services
  35. Using a FAX Machine
  36. Fax Troubleshooting
  37. Managing Caller ID Service
  38. Silence Suppression and Comfort Noise Generation
  39. Configuring Dial Plans
  40. Editing Dial Plans
  41. Secure Call Implementation
  42. Secure Call Details
  43. Using a Mini-Certificate
  44. SIP Trunking and Hunt Groups on the SPA8000
  45. About SIP Trunking
  46. Setting the Trunk Group Call Capacity
  47. Contact List for a Trunk Group
  48. Outgoing Call Routing for a Trunk Group
  49. Configuring a Trunk Group
  50. Trunk Group Management
  51. Setting the Hunt Policy
  52. Chapter 5: Configuring Music on Hold
  53. Changing the Music File for the Internal Music Source
  54. Configuring a Streaming Audio Server
  55. Configuring the Streaming Audio Server
  56. Using the IVR with an SAS Line
  57. Chapter 6: Configuring the PSTN (FXO) Gateway on the SPA3102
  58. How VoIP-To-PSTN Calls Work
  59. Two-Stage Dialing (SPA3102)
  60. How PSTN-To-VoIP Calls Work
  61. Terminating Gateway Calls
  62. VoIP Outbound Call Routing (SPA3102)
  63. Configuring VoIP Failover to PSTN
  64. PSTN Call to Ring Line 1 (SPA3102)
  65. Call Progress Tones (SPA3102 and SPA8800)
  66. PSTN to VoIP Call with and Without Ring-Thru
  67. Call Forwarding to PSTN Gateway (SPA3102 and SPA8800)
  68. Router Status
  69. Product Information section
  70. WAN Status
  71. Static IP Settings section
  72. Optional Settings section
  73. MAC Clone Settings section
  74. VLAN Settings section
  75. LAN Networking Settings section
  76. Port Forwarding Settings section
  77. Miscellaneous Settings section
  78. Info
  79. System Status section
  80. System Information section (PAP2T)
  81. Trunk Status section (SPA8000)
  82. System
  83. Internet Connection Type section (PAP2T)
  84. Miscellaneous Settings section (not used with PAP2T)
  85. SIP Parameters section
  86. SIP Timer Values (sec) section
  87. Response Status Code Handling section
  88. RTP Parameters section
  89. SDP Payload Types section
  90. NAT Support Parameters section
  91. Trunking Parameters section (SPA8000)
  92. Regional
  93. Call Progress Tones section
  94. Distinctive Ring Patterns section
  95. Distinctive Call Waiting Tone Patterns section
  96. Distinctive Ring/CWT Pattern Names section
  97. Ring and Call Waiting Tone Spec section
  98. Control Timer Values (sec) section
  99. Vertical Service Activation Codes section
  100. Vertical Service Announcement Codes section (SPA2102, SPA8000)
  101. Miscellaneous section
  102. Line
  103. Line Enable section
  104. Streaming Audio Server (SAS) section
  105. NAT Settings section
  106. Network Settings section
  107. SIP Settings section
  108. Call Feature Settings section
  109. Proxy and Registration section
  110. Subscriber Information section
  111. Supplementary Service Subscription section
  112. Audio Configuration section
  113. Gateway Accounts section (SPA3102)
  114. VoIP Fallback to PSTN section (SPA3102 and SPA8800)
  115. FXS Port Polarity Configuration section
  116. FXO Timer Values (sec) section (SPA8800)
  117. PSTN Disconnect Detection section (SPA8800)
  118. International Control section (SPA8800)
  119. Trunk Group page (SPA8000)
  120. Dial Plan section
  121. PSTN Line page (SPA3102)
  122. Dial Plans section
  123. VoIP-To-PSTN Gateway Setup section
  124. VoIP Users and Passwords (HTTP Authentication) section
  125. Ring Settings section
  126. PSTN Disconnect Detection section
  127. International Control (Settings) section
  128. User
  129. Call Forward Settings section
  130. Selective Call Forward Settings section
  131. Supplementary Service Settings section
  132. Distinctive Ring Settings section
  133. PSTN User page (SPA3102)
  134. PSTN-To-VoIP Speed Dial Settings section
  135. troubleshooting
  136. PAP2T
  137. SPA2102
  138. SPA8000
  139. Product Resources
  140. Related Documentation
PAP2T first page preview

PAP2T

Brand: Cisco | Category: Adapter
Table of contents
Related products
Small Business PAP2TLinksys PAP2PA-A2PA-2E3PA-2CT1PA-4B-UPA-2JT2PA-5EFL=PA-2PRIPA-100VG
Cisco categories
More Cisco categories