Abiomed Impella 2.5 manuals
Impella 2.5
Brand: Abiomed | Category: Medical Equipment
Table of contents
- instructions for use
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Warnings
- Indications (United States)
- Potential Adverse Events (United States)
- Cautions
- Overview
- Table 3.1 Impella ® Set-up and Insertion Kit Components
- Impella ® Catheter
- Table 3.3 Impella ® Catheter Components
- Figure 3.6 Electrical Signal Generated by the Cardiac Cycle
- Automated Impella ® Controller
- Purge Cassette
- Table 3.4 Purge Cassette Components
- Accessories
- Figure 3.16 Placement Guidewire
- Controller Features – Front View
- Controller Features – Side Views
- Home Screen
- Placement Screen
- Purge Screen
- Infusion History Screen
- Mobile Operation
- Pre-support Evaluation
- Startup
- Case Start
- Figure 5.5 Inserting the Catheter Plug into the Connector Cable
- Figure 5.7 Priming the Impella Purge Lumen
- Figure 5.9 Priming the Placement Signal Lumen
- Figure 5.11 Entering Purge Fluid Information
- Figure 5.12 Connecting the Purge Tubing to the Connector Cable
- Impella ® 2.5 Catheter Insertion (Wired)
- Figure 5.15 Inserting the Diagnostic Catheter
- Figure 5.17 Loading the Catheter on the Guidewire without the EasyGuide Lumen and Aligning the Placement Guidewire
- Figure 5.19 Aortic Waveform on Placement Signal Screen
- Wireless Insertion of the Impella ® 2.5 Catheter
- Impella CP ® Catheter Insertion
- Figure 5.21 Inserting the Diagnostic Catheter
- EasyGuide Lumen and Aligning the Placement Guidewire
- Figure 5.25 Aortic Waveform on Placement Screen
- Catheter
- Figure 5.27 Correct Positioning If Second Graft Lock Required
- Figure 5.28 Closing the Graft Lock
- Figure 5.29 Releasing the Graft Lock
- Alternate Insertion Technique for the Impella ® 5.0 Catheter
- Figure 5.31 Guidewire Placement
- a Sidearm Graft
- Figure 5.34 Waveform as Catheter is Advanced into the Aorta
- Figure 5.35 Pulsatile Waveform on Placement Signal Screen
- Catheters
- Figure 5.38 Ventricular Waveform on Placement Signal Screen
- Figure 5.40 Adjusting P-level
- from the Set-up Configuration
- Figure 5.43 Waveform as Catheter is Advanced into the Aorta
- Figure 5.44 Pulsatile Waveform on Placement Screen
- Figure 5.46 Confirming Placement on the Placement Signal Screen
- Figure 5.47 Selecting P-Level
- Figure 5.48 Confirming Placement on the Placement Signal Screen
- LD Catheter After Implantation
- Purge Cassette Procedures
- Tubing
- Troubleshooting the Purge System
- Patient Weaning
- Figure 5.53 Loosening the Tuohy-Borst Valve
- Summary of Primary Clinical Studies
- Table 6.1 Baseline Demographics and Characteristics
- Figure
- Summary of Supplemental Clinical Information
- Patients Likely to be Eligible for RCTs vs. Patients Likely to be Excluded from RCTs ("Salvage" Patients)
- Figure 6.11 Kaplan-Meier Curve Estimates for 30-Day Survival
- Figure 6.14 Decrease in Inotropes and Pressors (Post-Device Placement) for RECOVER I Patients
- Cardiac Shock After Open Heart Surgery
- Figure 6.15 RECOVER I Enrollment
- Figure 6.16 Kaplan-Meier Survival Curve for Freedom from Death (to 1 Year)
- Figure 6.27 Flow Diagram of the Distribution of the AB5000 LVAD PCCS Patient Cohort
- Figure 6.30 Decrease in Inotropes and Pressors (Post-Device Placement) for RECOVER I Patients
- Patient Management Overview
- Transport Within the Hospital
- ECG Interference
- Impella Stopped
- Hemolysis
- Table 7.1 Guide for Managing Hemolysis in Various Circumstances
- Figure 7.13 Displacing Air During Flush Solution Change Out Procedure
- Surgical Mode
- Transferring from the Automated Impella ® Controller to a New Automated Impella ® Controller
- Emergency Shutdown Procedure
- Alarms Overview
- Figure 8.1 Alarm Window
- Alarm Message Summary
- Terminology, Abbreviations, and Symbols
- Equipment Design
- Equipment Classifications
- Electromagnetic Compatibility
- Transport Between Hospitals
- Alarm Delay Information
- White Connector Cable
- Impella ® 2.5 Catheter Dimensions
- Impella ® 5.0 Catheter Dimensions
- Cleaning
- menu structure