ABB Emax E1.2-A manuals

Emax E1.2-A

Brand: ABB | Category: Circuit Tester

Table of contents

1. Table Of Contents
2. Table Of Contents
3. Emax E1.2 circuit-breakers
4. Warnings
5. Standards
6. Transport and checking on receipt
7. Identification of packaging
8. Storage method
9. Unpacking and handling
10. Weight of circuit-breakers without packaging
11. Description
12. Description of the circuit-breaker front panel
13. Description of electrical data plate UL
14. Manual operations for opening and closing the circuit breaker
15. Mechanical status indicators
16. Circuit breaker racking-in/racking-out operations
17. Mechanical position indicators
18. Environmental conditions
19. Altitude
20. Installation
21. Mounting the fixed part of the withdrawable circuit-breaker
22. Connection to the power circuit
23. Dimensions
24. Positioning anchor plates
25. Introduction to Ekip protection trip units
26. Protections
27. Integrated functions: Self-diagnosis, Test and Power Controller
28. Ekip Dip protection trip unit
29. LEDs
30. iTest pushbutton
32. S Protection
33. I Protection
34. G Protection
35. Neutral and frequency
36. Additional protections
37. Summary table of protections
38. Measurements
39. Test
40. List of alarms and signals
41. Summary table of LED signals
42. Ekip Dip: additional functions
43. Energy Store Time
44. Operating features
45. Default parameters
46. Accessories
47. Circuit-breaker dismantling operations
48. Circuit diagrams
49. Circuit-breaker terminal box
50. Electronic accessories
51. Connections
52. Ekip Link module
54. Signallings
55. Ekip Com Actuator module
56. Other accessories
57. Ekip Bluetooth module
58. Module Ekip Programming
59. Ekip Signalling 10K modules
60. Ekip Multimeter module
61. Electrical accessories
62. YU: undervoltage coil
63. YR: remote resetting coil
64. M: motor
65. Electrical signalling accessories
66. Aux 15Q: External additional open/closed auxiliary contacts
67. AUP: auxiliary position contacts
68. RTC: ready to close signalling contact
69. S51: trip unit tripping signalling contact
70. S33 M/2: springs charged signalling contact
71. Mechanical accessories
72. HTC / LTC: Terminal-covers
73. Mechanical safety accessories
74. PLP: padlock in connected/test/disconnected positions
75. SL: shutter lock
76. Mechanical Interlocks
77. Putting into service and maintenance
78. Wizard
79. Final check list
80. Identification of alarms or failures
81. Faults, causes and remedies
82. Faults signalled on the display
83. Maintenance
84. Circuit-breaker life
85. Maintenance operations
86. Disassembly operations
87. Cleaning and lubrication of the operating mechanism
88. Test with Ekip Connect
89. Decommissioning and treatment at end of life

Emax E1.2-A

Brand: ABB | Category: Circuit breakers