Lenovo BladeCenter HX5 1909 manuals
BladeCenter HX5 1909
Table of contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- guidelines for trained service technicians
- guidelines for servicing electrical equipment
- safety statements
- start here
- undocumented problems
- Chapter 1. Introduction
- Related documentation
- Notices and statements in this document
- Blade server controls and LEDs
- Scalability indicators
- Turning on the blade server
- Turning off the blade server
- System-board switches
- Blade server connectors - IBM MAX5
- System-board LEDs - BladeCenter HX5
- Working with a scalable blade complex
- Chapter 2. Configuring the blade server
- Partitioning a scalable blade complex
- Using the PXE boot agent utility program
- Using the Advanced Settings Utility (ASU)
- Updating the DMI/SMBIOS data
- Using the LSI Logic Configuration Utility program
- Updating firmware and device drivers
- Updating firmware for blade servers operating as a single partition
- Recovering from a UEFI update failure
- Out-of-band manual recovery method
- In-band automated boot recovery method
- method
- Accessing the IMM
- Resolving conflicts with the IMM LAN over USB interface
- Copyright Lenovo
- Parts listing - IBM MAX5
- Chapter 4. Removing and replacing blade server components
- Handling static-sensitive devices
- Installing a blade server in a BladeCenter chassis
- Disassembling a scalable blade complex
- Assembling a scalable blade complex
- Removing and replacing Tier 1 customer replaceable units (CRUs)
- Installing the blade server cover
- Removing an expansion unit
- Installing an expansion unit
- Removing the battery
- Installing the battery
- Removing and replacing Tier 2 CRUs
- Installing the scalability tray
- Removing the 1-node speed burst card
- Installing the 1-node speed burst card
- Removing the 2-node scalability card
- Installing the 2-node Scalability card
- Removing an IBM MAX5 expansion blade
- Installing an IBM MAX5 expansion blade
- Removing the IBM MAX5 1-node Scalability card
- Installing the IBM MAX5 1-node Scalability card
- Removing an SSD expansion card
- Installing an SSD expansion card
- Removing a solid state drive
- Installing a solid state drive
- Removing a DIMM - BladeCenter HX5
- Installing a DIMM - BladeCenter HX5
- Removing a DIMM - IBM MAX5 expansion blade
- Installing a DIMM - IBM MAX5
- Removing a hypervisor key
- Installing a hypervisor key
- Removing an I/O expansion card
- Installing an I/O expansion card
- Removing the control panel
- Installing the control panel
- Removing and replacing field replaceable units
- Installing a microprocessor and heat sink
- Removing the system-board assembly BladeCenter HX5
- Installing the system-board assembly BladeCenter HX5
- Chapter 5. Diagnostics
- Diagnostic tools overview
- Event logs
- Viewing event logs through the Setup utility
- POST error codes
- IMM error codes in AMM
- Light path diagnostics
- Viewing the light path diagnostics LEDs
- Light path diagnostics LEDs
- Light path diagnostics LEDs - IBM MAX5
- IBM Dynamic System Analysis
- DSA editions
- DSA messages
- Memory tests
- Optical drive (CD or DVD) test
- Hard disk drive test
- Ethernet controller test
- Troubleshooting tables
- General problems
- Intermittent problems
- Keyboard or mouse problems
- Memory problems
- Monitor or video problems
- Network connection problems
- Operating system problems
- Power error messages
- Power problems
- Removable-media drive problems
- ServerGuide problems
- Service processor problems
- media tray problems
- video problems
- Software problems
- Solving undetermined problems
- Appendix A. Getting help and technical assistance
- Using the documentation
- Hardware service and support
- Appendix B. Notices
- Important notes
- Documentation format
- Telecommunication regulatory statement
- Germany Class A statement
- Japan VCCI Class A statement
- Taiwan Class A compliance statement