Advantech AIMB-276 manuals
AIMB-276
Brand: Advantech | Category: Motherboard
Table of contents
- declaration of conformity
- ordering information
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Chapter 1 General Information
- Introduction
- Graphics
- Jumpers and Connectors
- Table 1.2: Jumper Setting List
- Board layout: Jumper and Connector Locations
- Figure 1.2 Jumper and Connector Location (Bottom Side)
- AIMB-276 Board Diagram
- Safety Precautions
- CMOS Clear (CMOS1)
- Watchdog Timer Output and OBS Beep (JWDT1+JOBS1)
- LVDS Panel Voltage Selection (JLVDS1)
- Memory Installation Procedures
- Table 2.1: LAN LED Indicator
- Serial Ports (COM1~COM2)
- CPU Fan Connector (CPU_FAN1)
- System FAN Connector (SYSFAN1/2)
- LED and Keyboard Lock Pin Header (JFP2)
- DC Input Phoenix Connector (DCIN1)
- SATA Signal & Power Connector (SATA1~SATA3 / SATA_PWR1~2)
- HD Analog Audio Interface (AUDIO1, FPAUD1)
- PCI-E x16 Slot (PCIEX16_1)
- LVDS Backlight Inverter Power Connector (INV1)
- NGFF M.2 B-Key & E-Key connector (M2B1 & M2E1)
- Audio Amplifier Output Connector (AMP1), BOM optional
- General Purpose I/O Pin Header (GPIO1)
- SPI BIOS Flash Socket (SPI1)
- SPI Programming Pin Header (SPI_CN1)
- Low Pin Count Header (LPC1)
- Case-Open Detect Connector (JCASE1)
- CMOS battery connector (BAT1)
- CPU Socket (CPU1)
- DDR4 SO-DIMM Socket (DIMMA1, DIMMB1)
- Chapter 3 BIOS Operation
- Main Menu
- Chipset Configuration Setting
- System Agent (SA) Configuration
- PCH-IO Configuration
- Security Setting
- Boot Setting
- Save & Exit Configuration
- Software Utility
- Before You Begin
- Windows 10 Driver Setup
- Chapter 6 VGA Setup
- Chapter 7 LAN Configuration
- A.1 Direct Current input connector (DCIN1)
- A.3 High-Definition Multimedia Interface connector (HDMI1)
- A.5 Universal Serial Bus Port 3.1 Gen2 #1/ #2 (USB12)
- A.7 Universal Serial Bus Port 3.1 Gen2 #3/ #4 (USB34)
- A.10 Universal Serial Bus Port 3.1 Gen2 #5 (USB5)
- A.12 Amplifier connector (AMP1)
- A.15 PCI Express x16 slot (PCIEX16_1)
- A.16 CMOS battery connector (BAT1)
- A.18 Case Open connector (JCASE1)
- A.20 Universal Serial Bus Port 3.1 Gen1 #9/ #10 box header (USB910)
- A.21 COM1 RI# selection pin header (JSETCOM1_V1)
- A.23 COM2 pin header ( S1.27MM) (COM2)
- A.25 COM1 pin header ( S1.27MM) (COM1)
- A.27 Subscriber Identity Module connector (SIM1)
- A.30 Voltage selection for JLVDS connector (JLVDS1)
- A.32 Power LED and keyboard lock pin header (JFP2)
- A.35 8-bits General Purpose I/O pin header( S1.27MM) (GPIO1)
- A.37 SPI BIOS flash socket (SPI1)
- A.39 AT/ATX Mode selection (PSON1)
- A.41 NGFF M.2 E-Key connector for 2230 module (M2E1 )