Menu
Ziton ZP752-2 Installation Sheet
Also see for ZP752-2: Installation sheet
  |
2 / 2 P/N 10-5221-501-ZSU1-01 • ISS 05FEB15Figure 2: Wiring diagramNotes1. Screened cable.2. EOLR required if circuit is not used.3. Terminal marking (plus/minus)indicates signal polarity when thecircuit is active. The polarityreverses when the circuit is notactive.4. Signal source must be CE andEN54-4 compliant. The jumper mustbe connected.5. Each output circuit provides up to 1A at 24 VDC. Each output circuithas a 1 A fuse. Fuses are monitoredby the panel.6. Devices connected to the outputcircuit must be polarized as shown.If non-polarized devices are used,insert a 1N4002/7 diode in thepositive leg of each device, with thestripe facing the device. Forinductive loads (relays etc), fit aBipolar Transient Protector(P/N 235196P) across the coil.7. Attach the supplied ferrites to cablesas shown in Figure 2 (internal to themodule).8. The following ferrite core needs tobe fitted to all cables (externally tothe module): TDK ZCAT3055-1330.Regulatory informationThis section includes both regulatory information and asummary on the declared performance according to theConstruction Products Regulation 305/2011. For detailedinformation refer to the product Declaration of Performance.CertificationCertification body 0370Declaration ofPerformance number360-5221-0199Year of first CE marking 10Product Identification ZP752-2Intended use See DoP point 3Essential characteristics See DoP point 9Manufacturer United Technologies Safety System Co.,Ltd.80, Changjiang East Road, QETDZ, 066004Qinhuangdao HEBEI, ChinaAuthorized EU manufacturingrepresentative:UTC Fire & Security B.V.Kelvinstraat 7, 6003 DH Weert, NetherlandsEuropean Uniondirectives1999/5/EC (R&TTE directive): Hereby, UTCFire & Security declares that this device isin compliance with the essentialrequirements and other relevant provisionsof Directive 1999/5/EC.2012/19/EU (WEEE directive): Productsmarked with this symbol cannot bedisposed of as unsorted municipal waste inthe European Union. For proper recycling,return this product to your local supplierupon the purchase of equivalent newequipment, or dispose of it at designatedcollection points. For more information see:www.recyclethis.info.Contact informationFor contact information, see www.utcfssecurityproducts.eu. |
Related manuals for Ziton ZP752-2
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved