Xilinx ML310 User Manual

Also see for ML310: User guide

Xilinx ML310 User Manual Manual pdf 2 page image

ML310 User Guide www.xilinx.com UG068 (v1.01) August 25, 20041-800-255-7778"Xilinx" and the Xilinx logo shown above are registered trademarks of Xilinx, Inc. Any rights not expressly granted herein are reserved.CoolRunner, RocketChips, Rocket IP, Spartan, StateBENCH, StateCAD, Virtex, XACT, XC2064, XC3090, XC4005, and XC5210 areregistered trademarks of Xilinx, Inc.The shadow X shown above is a trademark of Xilinx, Inc.ACE Controller, ACE Flash, A.K.A. Speed, Alliance Series, AllianceCORE, Bencher, ChipScope, Configurable Logic Cell, CORE Generator,CoreLINX, Dual Block, EZTag, Fast CLK, Fast CONNECT, Fast FLASH, FastMap, Fast Zero Power, Foundation, Gigabit Speeds...andBeyond!, HardWire, HDL Bencher, IRL, J Drive, JBits, LCA, LogiBLOX, Logic Cell, LogiCORE, LogicProfessor, MicroBlaze, MicroVia,MultiLINX, NanoBlaze, PicoBlaze, PLUSASM, PowerGuide, PowerMaze, QPro, Real-PCI, RocketIO, SelectIO, SelectRAM, SelectRAM+,Silicon Xpresso, Smartguide, Smart-IP, SmartSearch, SMARTswitch, System ACE, Testbench In A Minute, TrueMap, UIM, VectorMaze,VersaBlock, VersaRing, Virtex-II Pro, Virtex-II EasyPath, Wave Table, WebFITTER, WebPACK, WebPOWERED, XABEL, XACT-Floorplanner, XACT-Performance, XACTstep Advanced, XACTstep Foundry, XAM, XAPP, X-BLOX +, XC designated products, XChecker,XDM, XEPLD, Xilinx Foundation Series, Xilinx XDTV, Xinfo, XSI, XtremeDSP and ZERO+ are trademarks of Xilinx, Inc.The Programmable Logic Company is a service mark of Xilinx, Inc.All other trademarks are the property of their respective owners.Xilinx, Inc. does not assume any liability arising out of the application or use of any product described or shown herein; nor does it conveyany license under its patents, copyrights, or maskwork rights or any rights of others. Xilinx, Inc. reserves the right to make changes, at anytime, in order to improve reliability, function or design and to supply the best product possible. Xilinx, Inc. will not assume responsibility forthe use of any circuitry described herein other than circuitry entirely embodied in its products. Xilinx provides any design, code, orinformation shown or described herein "as is." By providing the design, code, or information as one possible implementation of a feature,application, or standard, Xilinx makes no representation that such implementation is free from any claims of infringement. You areresponsible for obtaining any rights you may require for your implementation. Xilinx expressly disclaims any warranty whatsoever withrespect to the adequacy of any such implementation, including but not limited to any warranties or representations that the implementationis free from claims of infringement, as well as any implied warranties of merchantability or fitness for a particular purpose. Xilinx, Inc. devicesand products are protected under U.S. Patents. Other U.S. and foreign patents pending. Xilinx, Inc. does not represent that devices shownor products described herein are free from patent infringement or from any other third party right. Xilinx, Inc. assumes no obligation tocorrect any errors contained herein or to advise any user of this text of any correction if such be made. Xilinx, Inc. will not assume any liabilityfor the accuracy or correctness of any engineering or software support or assistance provided to a user.Xilinx products are not intended for use in life support appliances, devices, or systems. Use of a Xilinx product in such applications withoutthe written consent of the appropriate Xilinx officer is prohibited.The contents of this manual are owned and copyrighted by Xilinx. Copyright 1994-2004 Xilinx, Inc. All Rights Reserved. Except as statedherein, none of the material may be copied, reproduced, distributed, republished, downloaded, displayed, posted, or transmitted in any formor by any means including, but not limited to, electronic, mechanical, photocopying, recording, or otherwise, without the prior written consentof Xilinx. Any unauthorized use of any material contained in this manual may violate copyright laws, trademark laws, the laws of privacy andpublicity, and communications regulations and statutes.RAll manuals and user guides at all-guides.com