Xerox WorkCentre C226 System Administration Guide xiWARNING - Electrical Safety Information• Use only power cord supplied with this equipment.• Plug the power cord directly into a grounded electrical outlet. Do not use an extension cord. If you donot know whether or not an outlet is grounded, consult a qualified electrician.• This equipment is to be operated from the type of electrical supply indicated on the product data platelabel. If this machine needs to be moved to a different location, contact a Xerox service representativeor your authorized local representative or service support organization.• Improper connection of the equipment-grounding conductor can result in electrical shock.• Do not place this equipment where people might step on or trip on the power cord.• Do not place objects on the power cord.• Do not override or disable electrical or mechanical interlocks.• Do not obstruct the ventilation openings.• Never push objects of any kind into slots or openings on this equipment• If any of the following conditions occur, switch off the power to the machine immediately and discon-nect the power cord from the electrical outlet. Call an authorized local service representative to correctthe problem.- The equipment emits unusual noise or odors.- The power cord is damaged or frayed.- A wall panel circuit breaker, fuse, or other safety device has been tripped.- Liquid is spilled into the copier/printer.- The equipment is exposed to water.- Any part of the equipment is damaged.Disconnect DeviceThe power cable is the disconnect device for this equipment. It is attached to the back of the machine as aplug-in device. To remove all electrical power from the equipment, disconnect the power cable from theelectrical outlet.
