Xerox ® DocuMate® 3120 Safetyvii User GuideNote: Your Xerox ® machine is equipped with an energy saving device to conserve power when themachine is not in use. The machine may be left on continuously.Do not do these:• Never use a ground adapter plug to connect the equipment to a power outlet that lacks aground connection terminal.• Never attempt any maintenance function that is not specifically described in thisdocumentation.• Never remove covers or guards that are fastened with screws. There are no operatorserviceable areas within these covers.• Never locate the machine near a radiator or any other heat source.• Never override or “cheat” any of the electrical or mechanical interlock devices.• Never place this equipment where people might step on or trip on the power cord.Caution: This device is not intended for use in the direct field of view at visual displayworkplacesTo avoid incommoding reflections at visual display workplaces this device must not be placed inthe direct field of view.Electrical InformationWarning - Electrical Safety Information1. The power receptacle for the machine must meet the requirements stated on the data plateon the rear of the machine. If you are not sure that your electrical supply meets therequirements, please consult your local power company or an electrician for advice.2. The socket outlet shall be installed near the equipment and shall be easily accessible.3. Use the power cable that is supplied with your machine. Do not use an extension cord orremove or modify the power cord plug.4. Plug the power cable directly into a correctly grounded electrical outlet. If you are not surewhether or not an outlet is correctly grounded, consult an electrician.5. Do not use an adapter to connect any Xerox ® equipment to an electrical outlet that lacks aground connection terminal.6. Do not place this equipment where people might step or trip on the power cable.7. Do not place objects on the power cable.8. Do not override or disable electrical or mechanical interlock devices.9. Do not push objects into slots or openings on the machine. Electrical shock or fire may result.