613.1 Communication ParametersTCP/IPThe following TCP/IP communication parameters must be set up for the6030/6050.The communication parameter nomenclature on the printer control panel willsometimes differ from the nomenclature on Print Services on Web (6030/6050) or Web Printer Management Tool (6050A). The Print Service on Weband Web Printer Management Tool nomenclature appears in bold type in thetable below.Menu Item DescriptionDefault Parser Selects the parser or data format interpreter thatwill be used when the input data format has notbeen specified from among the availableselections, that is, [HPGL], [VERSATEC], [TIFF],[CALS], or [PS/PDF]. The default setting is[HPGL].Ethernet Setting(Physical Layer)Selects the ethernet setting/physical layer. Thedefault setting is [AUTO].[AUTO] Automatic recognition[10BASE_T] Fixed at 10BASE_T[100BASE_T] Fixed at 100BASE_TIP Address The IP address of the machine in the formatXXX.XXX.XXX.XXX. The IP address can bechanged, if necessary.MASK Value(Net mask)The sub-net mask set up on the machine in theformat XXX.XXX.XXX.XXX. The subnet mask canbe changed, if necessary.E-Net Address(Ethernet address)Displays the Ethernet address. The valuedisplayed is unique for the hardware and cannotbe changed.FTP Determines whether or not to enable FTP. Thedefault setting is [Enable].Dynamic Routing Determines if dynamic routing will be enabled.The default setting is [ON].Static Routing* Determines if static routing will be enabled. Thedefault setting is [OFF]. Set Static Routing to [ON]when you need to view the device through agateway or router.Downloaded From ManualsPrinter.com Manuals
