Xantrex Prosine PS2.5 Installation And Operation Manual

Contents

Xantrex Prosine PS2.5 Installation And Operation Manual Manual pdf 5 page image

ii Prosine 2.5/3.0 Installation & Operation Guide12. WARNINGóRISK OF EXPLOSIVE GASESa) WORKING IN THE VICINITY OF A LEAD-ACID BATTERY IS DAN-GEROUS. BATTERIES GENERATE EXPLOSIVE GASES DURINGNORMAL BATTERY OPERATION. BEFORE INSTALLING ORUSING YOUR INVERTER/CHARGER, READ THIS MANUAL ANDFOLLOW THE INSTRUCTIONS EXACTLY.b) This equipment contains components which tend to produce arcs or sparks.To prevent fire or explosion do not install in compartments containing bat-teries or flammable materials or in locations which require ignition pro-tected equipment. This includes any space containing gasoline-poweredmachinery, fuel tanks, or joints, fittings, or other connection between com-ponents of the fuel system.c) To reduce the risk of battery explosion, follow these instructions and thosepublished by the battery manufacturer and the manufacturer of the equip-ment in which the battery is installed.13. PRECAUTIONS WHEN WORKING WITH BATTERIESa) Someone should be within range of your voice or close enough to come toyour aid when you work near a lead-acid battery.b) Have plenty of fresh water and soap nearby in case battery acid contactsskin, clothing, or eyes.c) Wear complete eye protection and clothing protection. Avoid touching eyeswhile working near battery.d) If battery acid contacts skin or clothing, wash immediately with soap andwater. If acid enters eye, immediately flood eye with running cold water forat least 20 minutes and get medical attention immediately.e) Baking soda neutralizes lead-acid battery electrolyte. Keep a supply onhand in the area of the batteries.f) NEVER smoke or allow a spark or flame in vicinity of a battery or engine.g) Be extra cautious to reduce risk of dropping a metal tool on the battery. Itmight spark or short-circuit the battery or other electrical part that maycause an explosion.h) Remove personal metal items such as rings, bracelets, necklaces, andwatches when working with a lead-acid battery. A lead-acid battery pro-duces a short-circuit current high enough to weld a ring or the like to metal,causing a severe burn.i) Use the Prosine inverter/charger for charging a LEAD-ACID battery only.Do not use the Prosine inverter/charger to charge nickel-cadmium or dry-cell batteries commonly used with home appliances and electronic equip-ment. These batteries may burst and cause injury to persons and damage toproperty.j) NEVER attempt to charge a frozen battery. Charging a battery when itstemperature is below 32∞ F (0∞ C) is inefficient and ineffective. If possible,gradually warm the battery above 32∞ F (0∞ C) before charging.