Menu
Xane F38 HORNET Assembly And Operation Instructions Manual
        |
F-38 HORNET-02-Thank you for purchasing the new F38 HORNET from Xane.Assembly for this aircraft is kept at a minimum.This plane is powered by a brushless outrunner motor paired with a factory calibrated electronic speedcontroller, ailerons control surfaces are controlled by servos; all of which are factory installed on theReady-to-Fly version. If you have KIT version, this manual also will let you know how to assembly it andmake the plane to Ready-to-Fly version.Please be sure to read the entire manual carefully prior to assembling/operating the F38 Hornet.Motor: 2830-1200KV Brushless Motor N/A Installed InstalledESC: Hobbywing 30A sky walkerServo:9g servo 2pcsReceiverRecommended battery:3S 2200-3200mahRecommended battery charger:3s Li-po balancing chargerRecommended Transmitter:Full-Range 6 channel 2.4GHZSpecificationsITEM SPECIFICATIONS KIT ARF RTFN/A Installed InstalledN/A Installed InstalledN/A InstalledN/AN/A InstalledN/AN/A InstalledN/AN/A InstalledN/AESCSERVO SERVORXPackage ContentsARF(PNP) VersionŸ Fuselage with factory installed motor, electronic speed controller and servosŸ Vertical stabilizerŸ Landing gear |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved