Menu
XC-Tracer Mini V User Manual
           |
User Manual XC Tracer Mini V Rev 01 2.9.2022Quick Start GuideXC Tracer Mini V is a high precision solar variometer with GPS and integrated FLARM / FANET. XCTracer Mini V transmits your position once per second and also your estimated trajectory for thenext 20 seconds. Any other FLARM devices in the vicinity can use this information to assess anypossible risk of collision. If another FLARM device determines that a collision is possible, it will warnthe pilot of the other aircraft. XC Tracer Mini V itself does not warn of possible collisions with otheraircraft.Many pilots use XC Tracer flight instruments for long XC flights and for competitions. But also forpilots with little flying experience an XC Tracer Variometer is the perfect choice. The lag-freeindication of lift / sink rate makes it much easier to find and core thermals than when using aconventional variometer. Data like airspeed, altitude, climb, course etc can be sent via BLE(Bluetooth Low Energy 4.0) to a mobile phone, tablet or e-reader.Attach the XC Tracer Mini V to the cockpit or thigh with the supplied velcro (Important: do notattach to the helmet or hang it around your neck with a leash!). Align the variometer as best youcan so that the sun shines on the solar cell during flight. Turn your XC Tracer Mini V on before take-off (or during flight) by pressing the red button until you hear a "beep-beep", then release the button.The GPS will now search for a fix, and as soon as it has a fix the vario makes a beep-beep-beeeeep,and the white LED starts flashing every 2-3 seconds.The vario will remain silent whilst you’re still on the ground, but as soon as you take off it will startbeeping. The XC Tracer Mini V has 5 volume levels: silent, quiet, gentle, medium and loud. Thevolume can be changed by briefly pressing the red button in the following order: silent - quiet –gentle - medium - loud - silent - quiet - etc.After landing, turn the XC Tracer Mini V off by pressing and holding the red button until you hear abeep-beep in descending order, then release the button. The white LED stops flashing, indicatingthat it’s now off. If you forget to turn it off it will turn itself off automatically if it detects a low battery.Important: Before disconnecting from the computer, please always eject the SD card on thecomputer.WARNING: Charge the battery with the USB cable on the PC or on a 5V charger. Only a 5Vconnection / charger may be used, do not use Fast Charge / Quick Charge / Super Charge /Turbo Power or whatever. If a voltage higher than 5V is used while charging, the electronics will bedestroyed. Never use a cheap charger; this can damage your XC Tracer Maxx II.We accept no responsibility for damage which occurs when not using the correct voltage forcharging! |
Related manuals for XC-Tracer Mini V
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved