Wavenet Software Development Tools__________________________ Boomer-III User Manual & Integrator’s GuideCopyright Wavenet Technology © October 2003 70 BM310012WT04Note: The message shown above will appear if you areattempting to upgrade using ApploaderM408.exe with a BM3modem.7. The following screen is typically displayed.8. Select the appropriate PC communications port to which themodem is connected.9. If the program recognises that the version of Application youare attempting to install is later than the version currentlyinstalled, the Download Application button will becomeenabled. A message is displayed in the status bar advising thatthe application software versions differ and requesting that youpress the Download Application button to update.If the program recognises that the version of Application youare attempting to install is earlier than the version currentlyinstalled, the Download Application button will remaindisabled. A message is displayed in the status bar advising thatthe application software version on the modem is up to date andrequesting that you exit the program.10. Click to update the Application software.A progress bar is displayed informing you of the progress of theupdate, and the modems TX led will flash as the modem isbeing loaded.11. After the application has been updated, the modem isautomatically switched off. A message is displayed promptingyou to switch the modem on again.12. Click and the download window will read the modemsapplication version and redisplay it.Select theappropriatecom port onyour PC thatthe modemis connectedto.Click theDownloadApplicationbutton todownloadthe latestversion.Displays the currentversion of Applicationsoftware on yourmodem.Displays the newapplication available.Status bar.