Safety Information Rammer Repair12 wc_si000514gb.fm1.3.5 Never leave the machine running unattended.1.3.6 Never tamper with or disable the function of operating controls.1.3.7 Never use the choke to stop the engine.1.3.8 Never operate the machine in areas where explosions may occur.1.3.9 Read, understand, and follow procedures in the Operator’s Manualbefore attempting to operate the machine.1.3.10 Make sure that all other persons are at a safe distance from themachine. Stop the machine if people step into the working area of themachine.1.3.11 Be sure operator is familiar with proper safety precautions andoperation techniques before using machine.1.3.12 Always keep hands, feet, and loose clothing away from moving partsof the machine.1.3.13 Always use common sense and caution when operating the machine.1.3.14 Always be sure the rammer will not tip over, roll, slide, or fall when notbeing operated.1.3.15 Always turn the engine OFF when the rammer is not being operated.1.3.16 Always guide the rammer in such a way that the operator is notsqueezed between the rammer and solid objects. Special care isrequired when working on uneven ground or when compacting coarsematerial. Make sure to stand firmly when operating the machine undersuch conditions.1.3.17 When working near the edges of breaks, pits, slopes, trenches andplatforms, always operate the rammer in such a way that there is nodanger of it tipping over or falling in.1.3.18 Store the machine properly when it is not being used. The machineshould be stored in a clean, dry location out of the reach of children.1.3.19 Close fuel valve on engines equipped with one when machine is notbeing operated.1.3.20 Always operate machine with all safety devices and guards in placeand in working order. Do not modify or defeat safety devices. Do notoperate machine if any safety devices or guards are missing orinoperative.1.3.21 Do not transport the machine while it is running.1.3.22 Do not tip the machine for cleaning or for any other reason.
