Vatech PaX-i3D Smart User Manual

Also see for PaX-i3D Smart: User manual Installation manual

Vatech PaX-i3D Smart User Manual Manual pdf 49 page image

42 I PaX-i3D Smart5.1 Turning On Equipment● Do not place the patient close to the equipment is on. Doing so may causeinjury to the body and damage to equipment.● Do not turn on the PC while the equipment is in operation. Doing so maycause an error.● Excessive temperature changes may cause condensation to form on theequipment. When room temperature is reached, turn on the equipment.● Equipment rebooting: After turning it off, the equipment may be turned onagain after 20 seconds.● Warm-up the equipment for at least 5 minutes before the operation. For thebest image quality, it is recommended that equipment be warmed-up for 30minutes or more.If the equipment has not been used for a long time, please leave enough timeto warm-up the equipment. It extends the life of the x-ray tube.The imaging system mainly consists of the imaging equipment and the PC.Before turning on the equipment, please confirm the equipment and PC correctlyinstalled.5. Getting Started