Page 2ECS 1MAlthough the manufacturer has made every effort toensure the accuracy of the information containedherein, this document is subject to change withoutnotice due to ongoing product development.WARNING AND PRECAUTIONSEquipment, probe failure, blown fuses and/or trippedbreakers may prove harmful to the contents of thebuilding. Therefore it is strongly recommended to installbackup devices and alarm or warning devices. Spareequipment should also be available at the owner’s site.Equipment manufactured by the manufacturer isprotected against normal line surges. High surgescaused by thunder storms or power supply equipmentmay damage this equipment. For added securityagainst line voltage surges, it is recommended thatsurge and noise suppression devices be installed at theelectrical distribution panel. Use of shielded cable forprobes is recommended for protection againstlightning. These devices are available from mostelectrical supply distributors.RECOMMENDATIONSThe manufacturer recommends that all installationprocedures described herein be performed by aqualified electrician or installation technician.Furthermore the manufacturer recommends to test allthe functions and equipment connected to the ECS,including the alarm system and backup devices, afterinstallation, after modifications, and once a month afterthat.Fuse verification and replacement, as well as theproper setting of control values, shall be theresponsibility of the owner of this equipment.www.monitrol.com