VADDIO BU-45H Installation And User Manual

VADDIO BU-45H Installation And User Manual Manual pdf 2 page image

Canon BU Series PTZ CamerasCanon BU-Series PTZ Camera Installation and User Guide 341-909 Rev. A Page 2 of 8UNPACKINGBU-45H SystemCarefully remove all of the parts from the packaging. Unpack and identify the following parts:• One (1) Canon BU-45H PTZ Camera• One (1) 12V PowerRite Power Supply with AC Cord Set (US or Euro and UK)• One (1) RS-232 to RS-422 Convertor (998-1000-422)• One (1) RJ-45F to DB-9 Adapter (998-1005-232)• One (1) RJ-45F to DB-9 Adapter (998-1003-232)• One (1) RJ-45F to 12-pin Adapter• One (1) 3’ CAT-5 Patch Cable (341-192)• Documentation: Vaddio Manual Canon BU-45H ManualFigure 2:BU-45H Connected to Vaddio ProductionVIEW HD-SDIBasic connectivity of the BU-45H Outdoor PTZ system:The Vaddio/Canon BU-45H PTZ system uses a CAT-5 for RS-232/RS-422 control to the camera The RS-232to RS-422 is port powered and it is recommended to be located close to the control source. While the CAT-5cable can be run up to 500’ (152.4m) from the camera, the Canon BU-45H is rated for a distances up to 246’(75m). See Appendix 1 for wiring and pin-out information.12 VDCPower SupplyCanon BU-45HPTZ CameraUp to 500’(152.4m)of Cat. 5for ControlRS-422 CAT-5 tothe RJ-45 to 12-pin adapter inputon the BU-45HCameraProductionVIEW HD-SDI3 ft. Cat. 5RS-232DB9F to RJ-45FRS-232 to RS-422AdapterRS- 232 toRS-422ConverterRJ-45F toDB-9MAdapterCoax Cable for HD-SDIVideo up to 246’