Menu
U-Media WMD-360A User Manual
                | |
1. Select [WEP] under [Security Mode]2. Put a check mark next to [Using Static WEP]3. Click [Config]. You will then see the screen below.4. [WEP Method] Select the correct encryption level to match your access point. Either 64,128, or 152-bit. The encryption level set her must match the encryption level used by youraccess point.a. [Authentication] You can choose between Auto, Open System, and Shared. Please seesection 2.5 for more information on the different types of authentication. For most installationschoosing “Auto” is the best choice.b. Enter the WEP key exactly as you did in your access point.There are three ways of generating a WEP Key:Make key using PassPhrase: a WEP Key is automatically generated as you type in anyPassPhrase of your choice. Use this feature when you have used a PassPhrase togenerate your WEP key on your access point.Manual Input (ASCII): You generate your own WEP Key using ASCII characters (5characters for 64-bit, 13 characters for 128-bit, 16 characters for 152-bit)8 |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved