Patton electronics ipRocketLink 3088FR Quick Start Manual

Contents

additional information

Patton electronics ipRocketLink 3088FR Quick Start Manual Manual pdf 2 page image

2 ipRocketLink 3088FR Quick Start Guide1.0 Power up the NTUYour NTU comes with one of the following power supply options:• Internal AC power supply with detachable power cord• External AC adaptor with detachable power cord• Internal DC power supply—no power accessories are included1.1 Models with internal AC power supply1. Insert the female end of the AC power cord into the internal power supply connector.2. Connect the male end of the power cord into an AC power outlet (100–240 VAC).1.2 Models with external AC adaptor1. Connect female plug of the AC power cord to the AC adaptor provided.2. Connect the barrel-type connector of the AC adaptor to the barrel-type power jack on the ipRocketLink.3. Insert the male plug of the AC power cord into an AC power outlet (100–240 VAC).• The ipRocketLink 3088FR contains no user serviceable parts. Theequipment shall be returned to Patton Electronics for repairs, orrepaired by qualified service personnel.• An approved external power supply that incorporates a disconnectdevice shall be used and positioned within easy reach of the operator.• For AC powered units, the power cable used to connect the powersupply shall meet all applicable standards for the country in which itis to be installed, and be connected to a wall outlet which hasearth ground.• Hazardous network voltages are present in WAN ports regardless ofwhether power to the unit is ON or OFF. To avoid electric shock, usecaution when near WAN ports. When detaching the cables, detach theend away from the 3088FR first.• Do not work on the system or connect or disconnect cables duringperiods of lightning activity.The interconnecting cables shall be acceptable for external use and shall be rated forthe proper application with respect to voltage, current, anticipated temperature, flam-mability, and mechanical serviceability.WARNINGCAUTION