Panasonic WX-CC411 Operating Instructions Manual

Also see for WX-CC411: Operating instructions Operating instructions

Contents

Panasonic WX-CC411 Operating Instructions Manual Manual pdf 16 page image

16Browser Operationwq Setting Help contact [Help contact]This tab is used to check the telephone number andconfigure the email transmission settings for the Helpcontact screen displayed on the LCD display of the CenterModule.Click the [Installation] button, then the [Help contact] tab.[Telephone]This field displays the telephone number. This setting can bechanged through operations on the Center Module unit.Configuring Help contact email transmissionsettingsThis area is used to configure the email to be sent from theLCD display Help contact screen.[Destination E-mail address]Set the destination email addresses. The same messagecan be sent to up to 5 email addresses.Number of characters: 3 to 128Types of characters: alphanumeric, characters @ . _ -[E-mail subject]Input the subject of the email.Number of characters: 0 to 50[E-mail body]Input the body of the email.Number of characters: 0 to 200wp The SMTP server must be set before an email can besent. To set the SMTP server, click the [Installation]button, then the [Server] tab.wp The following substitute characters can be used in theemail body. The substitute characters will be replacedwith the corresponding character string when theemail is sent.NoteSubstitutecharacters Character string after substitution%d% Help contact email sent datee.g. 05%M% Help contact email sent month (alphabeticalcharacter)e.g. Feb%m% Help contact email sent month (numericalcharacter)e.g. 02%Y% Help contact email sent year (four-digit)e.g. 2014%y% Help contact email sent year (the last two digits)e.g. 14%t% Help contact email sent timee.g. 15:00:00%i% IP address of the Center Module%s% Information entered in Site informationwp When using the Help contact email function, confirmthat emails can be sent correctly in advance when theunit is installed.Importantwq Setting Site information [Site info.]This tab is used to input information particular to the storein which the unit is installed, such as the contact number forthe store and management information. This information isused when viewing store information from a browser. Thisinformation can only be set and viewed with a browser.Click the [Installation] button, then the [Site info.] tab.Number of characters: 0 to 200