Panasonic WX-CC411 Operating Instructions Manual

Also see for WX-CC411: Operating instructions Operating instructions

Contents

Panasonic WX-CC411 Operating Instructions Manual Manual pdf 11 page image

11Browser Operation7 [SD memory card] buttonThis button is used to confirm the total storage capacityand remaining storage capacity on the SD card insertedinto the Center Module. (p. 26)8 [Quick] buttonThis button is used to confirm the operation settings thatwere set by touching the (Quick Operation button)on the Center Module. (p. 27)9 [Backup] buttonThis button is used to back up Center Module settingsand the message voice source file. (p. 27)Maintenance: [Maintenance] buttonThis button is used to perform various maintenance tasks.wp The maintenance menu is for maintenance staff.Altering settings and performing operations using themaintenance menu may affect store operation.Importantww Configuring and ConfirmingSettings at InstallationThis section describes how to configure and confirm settingsrelated to installation, such as date and time settings,network settings, each server setting, Network Camerasettings, help contact and site information.To display this screen, click the [Installation] button in theSetup menu panel.wq Confirming the date and time setting [Date& time]This function is used to confirm the date, time and daylightsaving time settings for the Center Module.To display this screen, click the [Installation] button, then the[Date & time] tab.After authentication, the following screen will be displayed.[NTP/ Time zone]Clicking on [NTP>>] displays the [Server] tab.The NTP server settings can be configured in the [Server]tab.[Center module time]Displays the current date and time of the Center Module.The date is displayed in the format of MONTH / DAY / YEAR.The time is displayed as a 24-hour clock.[Daylight saving time ON/OFF/AUTO]Displays the setting for daylight saving time.ON: Set the time to daylight saving time. (Advance thecurrent time by 1 hour)OFF: Cancel daylight saving time.AUTO: Daylight saving time is set based on the set dateand time to start and end (Month, week, day of theweek, time).[Daylight saving time Start date & time], [Daylight savingtime End date & time]Displays the start date and time and end date and timewhen Daylight Saving time is set to AUTO.