[Alarm] buttonDisplays the “Alarm” page. The settings relating to alarm occurrences such as settings for the alarm actionat an alarm occurrence, the alarm occurrence notification, and the VMD area settings can be configuredon the “Alarm” page. (®page 116)[Advanced view] buttonDisplays the “Advanced view” page. The settings relating to cropping can be configured on the “Advancedview”. (®page 136)[User mng.] buttonDisplays the “User mng.” page. The settings relating to the authentication such as users and PCsrestrictions for accessing the camera can be configured on the “User mng.” page. (®page 139)[Network] buttonDisplays the “Network” page. The network settings and the settings relating to DDNS (Dynamic DNS),SNMP (Simple Network Management Protocol), FTP (File Transfer Protocol), the NTP server, and Diffservcan be configured on the “Network” page. (®page 144)[Schedule] buttonDisplays the “Schedule” page. On the “Schedule” page, it is possible to designate time zones to allow toreceive alarm input or to allow to activate the VMD detection function. (®page 182)[Maintenance] buttonDisplays the “Maintenance” page. System log check, firmware upgrade, status check and initialization ofthe setup menu can be carried out on the “Maintenance” page. (®page 189)Camera titleThe title of the camera whose settings are currently being configured will be displayed.Setup pagePages of each setup menu will be displayed. There are tabs for some setup menus.46 Operating Instructions9 Display the setup menu from a PC
