Panasonic WV-CF634E Installation Manual

Also see for WV-CF614/E Series: Operating instructions

Contents

Panasonic WV-CF634E Installation Manual Manual pdf 18 page image

181 Connect the ∅3.5 mm miniature plug (mono channel) to the adjustment monitoroutput jack.Important:• This video output is intended for confirmation of view angle, etc. during installation or repairservice, and not for recording or monitoring.Note:• Video cannot be output through the video output cable after connecting the adjustmentmonitor.2 Pan, tilt and azimuth adjustmentImportant:• When adjusting pan, tilt or azimuth, do not hold the lens of the camera.1 Adjustment of panning positionLoosen the panning table lock screw androtate the table to determine the panningposition (adjustable range: 350 °).• The panning position can be adjustedbetween +180 ° (clockwise) and –170 °(counter-clockwise).• After the panning position is determined, fixthe panning table with the panning tablelock screw.(Recommended torque: 0.39 N·m)2 Adjustment of tilting positionTurn the tilting table to adjust the tiltingposition of the camera. (adjustable range:±90 °)• The view angle can be adjusted as the cam-era uses vari-focal lens.• Tighten the tilting lock screw afteradjustment.(Recommended torque: 0.59 N·m)AdjustmentOriginal position markPanning tablePanning table lockscrew[LOCK]Clockwise: +180 ºCounter-clockwise: -170 ºAdjustable range: ±90 °