Panasonic WV-BF102 Operating Instructions Manual

Also see for WVBF102 - CCTV CAMERA: Operating instructions

Contents

Panasonic WV-BF102 Operating Instructions Manual Manual pdf 9 page image

Pin No.Copper wire size(AWG)#18(0.83mm2 )-7-How to assemble the cable with the accessoryconnectorStrip back the cable jacket approx. 3 mm (1/8 inch)and separate the individual conductors.Recommended wire gauge sizes for 12 V DC line.#24(0.22mm2 )Lengthof Cable(Approx.)(m)(ft)#22(0.33mm2 )#20(0.52mm2 )20 30 45 7565 100 160 260Accessory Connector InformationPower Source Cable Color1 :2 :GroundDC 12VBlackWhitePrepare the individual conductors for clamping. UseMOLEX band tool part number 57027-5000 (for UL-Style Cable UL1015) or 57026-5000 (for UL-StyleUL1007) for clamping the contacts.After clamping the contacts, push them into the properholes in the accessory connector of this camera untilthey snap in place.• Shrinking the cable-entry seal is a one-time pro-cedure. Do not shrink the cable-entry seal until ithas been ascertained that the unit is functioning.CONNECT THIS TO 12V DC CLASS 2 POWERSUPPLY ONLY.• To prevent fire or electric shock hazard, the ULlisted wire VW-1 style 1007 should be used forthe cable for 12V DC Input Terminals.AUp WireContactUpContactWireApprox.3 mm (1/8 inch)Insert the wire until A positionand clamp the contacts.21• Power supply connectionCautionsInsert