35 Port SetupPerform the settings for the following items for eachport.[DHCP]Select ON or OFF to determine whether or not to usethe DHCP server.Select "ON" to obtain an IP address, a subnet mask anda gateway address from the DHCP server. Set to "OFF"when entering the addresses above manually.ON: Uses the DHCP server.OFF: Does not use the DHCP server.[IP Address]When "OFF" is selected for "DHCP", enter an IPaddress. For this unit, enter 4 units from the decimalnumbers (0-254).[Subnet Mask]Enter a subnet mask according to the network configu-ration when OFF is selected for "DHCP".[Gateway]Enter the IP address of the gateway according to thenetwork environment when "OFF" is selected for"DHCP".[Line Speed]The following are available for "Line Speed".AUTO: Line speed will be applied automatically.10-HALF: 10 Mbps semi duplex10-FULL: 10 Mbps full duplex100-HALF: 100 Mbps semi duplex100-FULL: 100 Mbps full duplexNote:When the setup menu is closed after changing theline speed, the unit will automatically restart.

setup instructions

Preface

About these Operating Instructions

Abbreviations

Operations Flow

Performing the Network Settings

Performing the Network Settings of a PC

About the Network Security of this Unit

Display the Operation Window

About the Operation Window

Control] Tab

Cam Select] Tab

Setup] Tab (Quick Setup Menu)

Setup] Tab (Advanced Setup Menu)

Status Display Area

Playback Point Operation Area

CAM] Tab

Setup Menu (Quick)

Display/System Settings [Display Setup]

Camera Network Settings and Group Settings [Camera Setup]

Rec & Event Setup]

Perform the Settings for Network [Network Setup]

Setup Menu (Advanced) Chart

Basic Operation with the Setup Menu (Advanced)

Perform the Settings for the System [System]

Functions for Recording [Recording]

Functions for Events [Event]

Settings for the Recording/Event Schedule [Schedule]

Settings Relating to Cameras [Camera]

Settings for Communication with other Devices [Comm]

Settings Relating to the User Authentication [User Mng.]

Settings for Maintenance [Maintenance]

About the Hard Disk Drives

Display the HDD DISK MENU

Initialize the Hard Disk Drive [Format]

Remove the Hard Disk Drive from the System Logically [Remove]

Troubleshooting

Panasonic WJ-ND300 Setup Instructions

WJ-ND300 Administrator Console

operating the unit for the first time

operating instructions

Limitation of Liability

System Requirement for a PC

Start/exit the software

Main window

Icons in the tree display area

Operation flow

Detect recorders/cameras and confirm the current settings

Arrange the camera number by moving/deleting the camera icon

Delete a camera icon

Edit the settings

Register the recorder and cameras, and confirm the result (Manual Registration)

Tips to configure the settings

administrator console

Features

Preparations

Installing This Software

Uninstalling This Software

Start the Software

Setting Items

Download the Setting Values

Upload the Setup File

Open the Setup File

Save the Setup File

Create a Setup File Newly

Convert the Version of the Setup File Format

Change the Password

Error Messages

hdd tab

specifications

Recording/Playback/Live Image Transmission

Recording

Playback

Playback after Selecting a Disk

Playback from a Designated Time and Date

Search and Play Recorded Event

How to Operate

Monitor Live Images

Display Images from Cameras on a 4-Screen

Display Images in the Sequential Display

Control Cameras

Zoom/Focus/Iris Operations

Move a Camera to the Preset Position

About the Event Function

Cancel the Alarm Action

Copying (Duplicate)

Deletion of Recorded Images Saved on the Hard Disk Manually

Display/Edit the Text Information

Transmits Camera Images onto an FTP Server

Check Logs

Check the Access Log

Check the Event Log

Check the Network Trouble Log

Download Recorded Images

Play Downloaded Images

Install the Viewer Software

Playback Downloaded Images

Save Downloaded Images

Print the Displayed Image

Perform the Alteration Detection

Notification by E-Mail

Warning Mail Notification

About the Error Log

Precaution

System Requirements for a PC

Start/Exit the Software

Main Window

Icons in the Tree Display Area

Operation Flow

Detect WJ-ND300 (A)/Cameras and Confirm the Current Settings

Arrange the Camera Number by Moving/Deleting the Camera Icon

Edit the Settings

Register the WJ-ND300 (A) and Cameras, and Confirm the Result CAM IP Auto Addressing)

Register the WJ-ND300 (A) and Cameras, and Confirm the Result Manual Registration)

Detect WJ-ND200/Cameras and Confirm the Current Settings

Tips to Configure the Settings

Panasonic WJ-ND300 Setup Instructions

Product

Learn More

Legal