Panasonic Viera WT50H Series Operating Instructions Manual

Panasonic Viera WT50H Series Operating Instructions Manual Manual pdf 40 page image

How to Use Menu Functions40Menu Item Adjustments / Configurations (alternatives)Picture3D Settings Adjusts and sets to view 3D images (p. 36)Screen DisplayTurns the screen off when you select [Off][Off] / [On]● The sound is active even if the screen turns off.● Press any buttons (except Standby) to turn the screen on.● This function is effective in reducing power consumption when listening to thesound without watching the TV screen.Area Dimmer ControlAutomatically controls dark areas according to the images [Off] / [On]● If the uncomfortable dark images occur, set to [Off].● This function is available when [Viewing Mode] is set to [Dynamic], [Normal] or[Cinema].Advanced Settings1080p Pure DirectReproduces the original image quality in detail for 1080p (HDMI) input signal[Off] / [On]● Not valid on 3D modeMotion Picture ProAutomatically compensates the picture frame rate and removes judderingmovements to make the images smooth [Off] / [Min] / [Mid] / [Max]● Depending on the contents, images may be noisy. To prevent the noise, changethe setting.● Not valid on PC mode or when [Viewing Mode] is set to [Game]24p Smooth FilmAutomatically compensates the picture frame rate to make the 24p source movieimages smooth [Off] / [Min] / [Mid] / [Max]● This is available only for 24p signal input and displayed instead of [MotionPicture Pro].● Not valid on PC mode or when [Viewing Mode] is set to [Game]Film CadenceDetectionImproves vertical resolution for movie images [Off] / [On]● This function is available for the interlaced signal (except in the mode of PC,VIERA Connect or when [Viewing Mode] is set to [Game]).3D Refresh RateReduces juddering and flicker noises of the 3D images when using the 3DEyewear [Auto] / [100Hz] / [120Hz][100Hz]:If light appears to flicker under fluorescents (or dimmers) of 50 Hz.[120Hz]:If light appears to flicker under fluorescents (or dimmers) of 60 Hz.If flicker noises appear with 50 Hz input signal.16:9 OverscanSelects the screen area displaying the image [Off] / [On][On]:Enlarges the image to hide the edge of the image.[Off]:Displays the image in the original size.● Set to [On] if noise is generated on the edge of the screen.● This function is available when aspect is set to [16:9].● This function can be memorised separately for SD (Standard definition) and HD(High definition) signals.● Not valid on PC mode or VIERA ConnectAV Colour System Selects optional colour system based on video signals in AV mode[Auto] / [PAL] / [SECAM] / [M.NTSC] / [NTSC]Colour MatrixSelects the suitable colour parameter for SD (Standard definition) or HD (Highdefinition) signal [SD] / [HD]● This function is available with 480p or 576p input signal from COMPONENT orHDMI terminal.DVI Input SettingChanges the black level of the image for HDMI input mode with DVI input signalmanually [Normal] / [Full]● When the DVI input signal from the external equipment (especially from PC) isdisplayed, the black level may not be suitable. In this case, select [Full].● The black level for HDMI input signal will be adjusted automatically.● For HDMI input mode with DVI input signal