Watching TV●Basic19Display the selectable settings for the current statusCheck or change the currentstatus instantlyOPTION To change●changeselectMulti Video (DVB mode)Allows you to select the image (if available)This setting is not memorized and it will return to the●default setting once you exit the current programme.Multi Audio (DVB mode)Allows you to select between alternative language forsound tracks (if available)This setting is not memorized and it will return to the●default setting once you exit the current programme.Dual Audio (DVB mode)Allows you to select stereo / monaural (if available)Sub Channel (DVB mode)Allows you to select the multifeed programme - subchannel (if available)Subtitle Language (DVB mode)Allows you to select the language in which subtitlesshould appear (if available)Teletext Character SetSets the teletext languageSetup Menu (p. 38)Teletext Language (DVB mode)Allows you to select between alternative language forteletext (if available)MPX (Analogue mode)Selects multiplex sound mode (if available)Sound Menu (p. 35)Volume CorrectionAdjusts volume of individual channel or input modeUSB Remove SafelyTakes this operation to remove the connected USBdevice safely from the TVLast viewSwitch to previously viewedchannel or input mode easily LAST VIEWPress again to return to the present view.●NoteSwitching channel is not available while the recording of Timer Programming, Direct TV Recording or●One Touch Recording is in progress.Watching less than 10 sec. is not regarded as the previously viewed channel or input mode.●Off TimerTurn the TV to Standby mode automatically after a fixed periodDisplay the menu Select “Setup” Select “Off Timer” and set the timeMENU Main MenuPictureSoundSetupaccessselectSetup Menu 1/2Off Timer OffLink SettingsUSB HDD SetupChild LockDVB-T Tuning MenuLanguageDisplay Settings3D SettingsTimer ProgrammingsetselectTo cancel● Set to “Off” or turn the TV off.To display the remaining time● Information banner (p. 17)NoteWhen the remaining time is within 3 minutes, the remaining time will flash on the screen.●