Accessories / OptionsQuick Start Guide7Installing / removing remote’s batteries1Pull OpenHookCautionIncorrect installation may cause battery leakage and corrosion,resulting in damage to the remote control.Do not mix old and new batteries.Do not mix different battery types (such as alkaline and manganesebatteries).Do not use rechargeable (Ni-Cd) batteries.Do not burn or break up batteries.Batteries must not be exposed to excessive heat such as sunshine,fire or the like.Do not disassemble or modify the remote control.2Note the correctpolarity (+ or -)CloseAttaching / removing the pedestalWarningDo not disassemble or modify the pedestal.Otherwise the TV may fall over and become damaged, and personal injury may result.CautionDo not use any pedestal other than the one provided with this TV.Otherwise the TV may fall over and become damaged, and personal injury may result.Do not use the pedestal if it becomes warped or physically damaged.If you use the pedestal while it is physically damaged, personal injury may result. Contact your local Panasonicdealer immediately.During set-up, make sure that all screws are securely tightened.If insufficient care is taken to ensure screws are properly tightened during assembly, the pedestal will not be strongenough to support the TV, and it might fall over and become damaged, and personal injury may result.Ensure that the TV does not fall over.If the TV is knocked or children climb onto the pedestal with the TV installed, the TV may fall over and personal injurymay result.Two or more people are required to install and remove the TV.If two or more people are not present, the TV may be dropped, and personal injury may result.When removing the pedestal from the TV, do not remove the pedestal by the methods other than the specifiedprocedure. (p. 8)Otherwise the TV and / or pedestal may fall over and become damaged, and personal injury may result.